مقایسه دینامیکی و استاتیکی اتصال دم چلچله و فاق و زبانه در گونه نراد

-Anonymous. 2000, Wood Hand book.Wood as an Engineering Material Agricultural. Handbook 72. UDSA. Forest product Laboratory. Madison WI, 42-48.

-Altun, S., Burdurlu, E. and Kilic, M., 2010. Effect of adhesive type on the bending moment capacity of miter frame corner joints. Bioresources Journal, 5(3): 1473-1483

- Bodig J. and Jayne B.A., 1993.  Mechanics of Wood and Wood Composites. Malabar; Krieger Publishing Company, 712P

-Brancheriau, L., Kouchade, C. and Bremaud, I., 2010. Internal friction measurement of tropical species by various acoustic methods. J. Wood Sci. DOI 10.1007/s10086-010-1111-8

- Biechele, T., Chui, YH. and Gong, M., 2010. Assessing stiffness on finger-jointed timber with different non-destructive testing techniques. In: Proc of "the Future of Quality Control for Wood Products". The final conference of COST Action E53. May 4th – 7th; Edinburgh – UK. http://cte.napier.ac.uk/e53

-Custodio, J., Broughton, H. and Cruz, A., 2009. A Review of Factors Influencing the Durability of Structural Bonded Timber Joint. International Journal of Adhesion&Adhesive. 29:173-185

-Ceraldi, C., Mormone, C. and Ermolli, E., 2001. Resistographic Inspection of Acient Timber Structures for the Evaluation of Mechanical Characteristics.Material Structure Journal.34:59-64

-Dalvand, M. and Moradpour, D., 2017.Analysis of stress-- strain distribution of dowel and glue line in L-type furniture joint by means of fiinite element method. Iranian Journal of Wood and Paper Industries, 8(2): 297-307.

-Derikvand, M., Ebrahimi, G.h. and Eckelman, C.A., 2013. Effect of shoulder thickness on bending moment capacity of mortise and loose tenon joint, Iranian Journal of Wood and Paper Industries, 28(1): 65-75.

- Dalvand, M., Maleki, S., Ebrahimi, G.H. and Haftkhani, A.R., 2011. Determination of stress carrying capacity of doweled corner joints in framed furniture structure constructed of Fir. Iranian Journal of Wood and Paper Industries.

-Derikvand, M.,  Smardzewski, J., Ebrahimi, G.h, Dalvand, M. and Maleki, S., 2013 .Withdrawal force capacity of mortise and loose tenon T-type furniture joints, Turkish Journal of Agriculture and Forestry, 37: 377–384.

-Eckelman, C., 2003. Textbook of product engineering and strength design of furniture.

-Eckelman, C. and Haviarova, E., 2006. Performance test of school chairs constructed with round mortise and tenon jounts. Forest products journal. 56(3): 51.

-Ghofrani, M. and Noori, H., 2009. Lateral holding strength of wooden dowel, screw and ready-to-assemble joints (RTA joints) constructed of Medium Density Fiberboard (MDF). Iranian Journal of Wood and Paper Science Research, 24(2): 219-231.

-Ghofrani, M., Kahvand, M. and Noori, H., 2015.Stress carrying capacity of Miter Frame corner joints constructed with loose tenon under tension and compression load. Iranian Journal of Wood and Paper Science Research, 30(2):308-319

-Horwood, R., 1999. Wood workers hand book. New Holland publisher, London, 160 p.

-Hossein, M, A., Roohnia, M. and Shahverdi, M., 2009. Some footprints of wood internal defects on three first mode-shapes of free vibration،16th international symposium on nondestructive testing and evaluation of wood, Beiging, China

-Haviarova, E., Eckelman, C. and Erdil, Y., 2001. Design and testing of environmentally friendly wood school chairs for developing countries. forest products journal, 51( 3): 58-64.

-Jackson, A. and Day, D., 1995. Good wood joints. Harpercollins publisher. London, 128 p.

-Jahan Latibari, A., Ghofrani, M. and Noori, H., 2005. Investigation the holding strength of dowel joint constructed of particleboard, Iranian Journal of Agricultural Sciences 11(1): 135-148.

-Kahvand, M., Omrani, P. and Ebrahimi, G.h., 2013. Determination of bending moment resistance of Ttype joints constructed with wood biscuit, Iranian Journal of Wood and Paper Industries

-Kurt, S., Uysal, B., Ozcan, C. and Yildirim, M.N., 2009. The effects of edge banding thickness of Uludag Fir bonded with some adhesives on withdrawal strengths of Beech dowel pins in composite materials, BioResources Journal. 4(4): 1682-1693.

-Kyuchukov, G., Jivkov, V., Karalivanos, A. and Jelacic, D., 1999. Fit influence on the withdrawlal strength of dowel joints from wood composite. Faculty Forestry, University of Zagreb, Zagreb. 125-130 p.

-Maleki, S., Faezipour M., Ebrahimi, G.h., Faezipour, M. and Layeghi, M., 2012 .Investigation on bending moment resistance of L- shaped screwed corner joints constructed of plywood members, Iranian Journal of wood and paper Science Research, 27(4): 732 -742

-Noll, T., 2007. Wood workers joints book. Apple press, United kingdom, 192 p.

-Obataya, E. and Norimoto, M., 2000. Acoustic properties of a reed (Arundo donax L.) used for the vibrating plate of a clarinet. Journal of Acoustical Society of America, 106(2): 1106-1110.

- Roohnia, M., Tajdini, A. and Manouchehri, N., 2011(a). Assessing wood in sounding boards considering the ratio of acoustical anisotropy. ndt&e International. 2011(d); 44:13-20

-Roohnia, M., Hashemi-dizaji, S.F., Brancheriau, L.A.,  Tajdini, A.H. and Manouchehri, N., 2011(b). Effect of soaking process in water on the acoustical quality of wood for traditional musical instruments, BioResources. 6(2): 2055-2065

-Wegst, U.K.G., 2006. Wood for sound. American Journal of Botany, 93(10): 1439-1448

-Williamson, T.G., 2002. APA Engineeres Wood Handbook, McGraw-Hill, 750. Yang, T.H., Wang S.Y., Lin C.J., Tsai M.J., 2008: Evaluation of the Mechanical Properties of Duglas- fir and Japanese Cedar Lumber and its Structural Glulam by Nondestructive Techniques. Construction and Building Materials, 22: 487-493.