Related Links
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 2, Volume 37, Issue 3 - Serial Number 80, September 2022, Pages 193-203 PDF (1023.33 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2022.357523.1708 | ||
| Authors | ||
| Seyed atefe Nasiri* 1; ahmadreza saraeyan2; Ali Ghasemian2; Ghasem Asadpour Atoi3 | ||
| 1PhD student, Pulp and Paper Industries, Gorgan University of Agricultural Sciences and Natural Resources, Iran | ||
| 2Associate Professor, Department of Wood and Paper Industries, Gorgan University of Agricultural Sciences and Natural Resources, Iran | ||
| 3Associate Professor, Department of Wood Industries and Cellulose Products, Sari University of Agricultural Sciences and Natural Resources, Iran | ||
| Abstract | ||
| The strength properties of medium corrugated board which is made using recycled pulp are always important. The aim of this study was to investigate the effect of bulking agent’s addition and acetylated starch on the strength properties of corrugated board from neutral sulfite semi-chemical and old corrugated container pulp. For this purpose, the pulp was treated with two materials separately including tri (propylene glycol) butyl ether and di (propylene glycol) butyl ether bulking agents in the 0.9% dry weight of the pulp level. In addition, each of these bulking agents was added with acetylated starch (at the level of 4% of dry weight of the pulp) to the pulp suspension. The strengths properties of corrugated board were measured. The results showed that the corrugated board treated by tri (propylene glycol) butyl ether and di (propylene glycol) butyl ether bulking agents had the highest bulk and thickness in comparison to other samples. Also, the strength properties of samples decreased by adding bulking agents. Acetylated starch was used to improve the strengths of samples. Addition of acetylated starch with bulking agents improved the strengths of samples. Corrugated board with tri (propylene glycol) butyl ether and acetylated starch showed highest tensile, burst, tear strengths, stiffness, CMT and RCT. Results showed that the effect of different treatments is statistically significant in all trials. | ||
| Keywords | ||
| Bulking agents; corrugated container; recycle paper; NSSC pulp | ||
| References | ||
|
-Afra, A., 2002. Properties of paper: An introduction. Aeezh publication, Tehran, 392 p. -Elyasi, SH. and Jalali, H., 2017. Effect of anionic starch solution concentration on paper surface calibration on physical and resistance properties of recycled paper. Iranian Journal of Wood and Paper Industries, 7(3):487-497. -Jogikalmath, G., Soane, D. and Schneider, A., 2015. Bulk and stiffness enhancement in papermaking. Nano paper, L1C. US Patent, 8926796 B2. -Joseph Mauk, S. and Vanness, H.C., 2001. Thermodynamics introduction to chemical engineering. McGraw-Hill, New York, ISBN:07-240296-2. -Lee, J., Lee, E. K., Seo, D. J., Lim, G. B. Kim, S. Y., Park, J. H. and Kim, E. H., 2014. Fundamental study on developing wood powder as an additive of paperboard. TAPPI journal, 13(11):17-22. -Mirshokraee, A., 2008. Pulp and paper production technology. Aeezh publication, Tehran, 501 p. -Park, J. H., Lee, J. Y. Kim, C. H. and Kim, E. H., 2015. Effects of lignocellulosic bulking agents made from agricultural byproducts on physical properties and drying consumption of duplex board. BioResources, 10(4): 7889-7897. -Rahmani, S. F. and Talaripoor, M., 2011. Study on production of fluting paper from wheat straw soda-AQ pulp and OCC pulp blends. Iranian journl of wood and paper science research, 26(2):387-397. -Rezayati, P., Kalantari, S. and Azizi, A., 2020. Influence of using native through modification with a-amylase enzyme for surface paper sizing as an alternative to oxidized starch. Iranian journal of wood and paper industries, 11(3): 433-443. -Roy, D., Semsarilar, M., Guthrie, J. T. and Perrier, S., 2009. Cellulose modification by polymer grafting. Preview of Chemical Society Review, 38(7):1825-2148. -Swerin, A., Song, J.C., Bednarik, L., Lee, P.F., Herman, M.C. and Yang, S., 2014. Paper with Improved Stiffness and Bulk and Method for Making same, Justia patent, 0335333. -Tudarvari, Z., Farsi, M. and Asadpur, GH., 2016. Effect of fiber length variation of different OCC pulp recycled papers on strength properties of fluting paper. Journal of wood and forest science and technology, 23(4): 255–267. -Tahmasbi, F., Ghassemian, A., Mahdavi, S. and Saraeyan, A., 2015. NSSC pulping of grain sorghum stalk to produce fluting paper. Iranian journal of wood and paper science research, 23(3): 91–108. -Yoshida, S. and Akita, T., 1995. Method of making paper. European Patent, EP0415385B1.
| ||
|
Statistics Article View: 1,629 PDF Download: 279 |
||
Journal management system. designed by sinaweb