| تعداد نشریات | 282 |
| تعداد نشریات سازمان | 80 |
| تعداد شماره‌ها | 3,251 |
| تعداد مقالات | 35,918 |
| تعداد مشاهده مقاله | 54,595,622 |
| تعداد دریافت فایل اصل مقاله | 93,703,893 |
تأثیر پلیمر آکواسورس بر برخی خصوصیات فیزیکی و رطوبتی خاک‌های مختلف | ||
| تحقیقات مهندسی سازه های آبیاری و زهکشی | ||
| دوره 22، شماره 82، اردیبهشت 1400، صفحه 23-42 اصل مقاله (968.34 K) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22092/idser.2021.124053 | ||
| نویسندگان | ||
| سالومه سپهری صادقیان* 1؛ نادر عباسی2؛ محمدمهدی نخجوانی3 | ||
| 1استادیار مؤسسه تحقیقات فنی و مهندسی کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران | ||
| 2استاد مؤسسه تحقیقات فنی و مهندسی کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران | ||
| 3استادیار موسسه تحقیقات فنی و مهندسی کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران | ||
| چکیده | ||
| یکی از مهمترین چالشهای حال و آینده، به ویژه در مناطق خشک جهان، کم آبی است. یکی از روشهای بهبود بهره وری آب و مدیریت بهتر آب مصرفی در بخش کشاورزی، کاربرد مواد جاذب رطوبت است. هدف از تحقیق حاضر ارزیابی اثر کاربرد پلیمر جاذب رطوبت آکواسورس بر پارامترهای فیزیکی و منحنی مشخصۀ رطوبتی سه بافت مختلف خاک است. آکواسورس نسل جدیدی از پلیمرهای جاذب رطوبت بر پایۀ پتاسیم است که زیست تخریب پذیر بوده و فاقد ترکیب مخرب آکریل آمید است. به این منظور، آزمایشهایی به صورت فاکتوریل در قالب طرح کاملاً تصادفی با 3 تکرار اجرا شد که فاکتور اول چهار درصد وزنی از پلیمر جاذب رطوبت (صفر، 5/0، 1 و 2 درصد وزنی پلیمر/خاک) و فاکتور دوم سه بافت مختلف خاک (لوم شنی، لوم رسی و رسی سیلتی) بود. نتایج بررسیها نشان داد که در تمامی بافتهای خاک مورد مطالعه، کاربرد مادۀ جاذب رطوبت و افزایش سطح مورد استفاده، میزان رطوبت را در نقطۀ ظرفیت زراعی و نقطۀ پژمردگی دائم افزایش دادهاست. بیشترین مقدار رطوبت قابل استفاده گیاه در بافتهای لوم شنی، لوم رسی و رسی سیلتی به ترتیب به میزان 8/9، 8/13 و 7/12 درصد حجمی و مربوط به کاربرد 5/0 درصد وزنی مادۀ جاذب رطوبت در این تیمارهاست. کاربرد مقادیر بیشتر سبب کاهش رطوبت قابل استفاده برای گیاه شدهاست. بنابراین، با آنکه پلیمر جاذب رطوبت آکواسورس در جذب آب توانایی خوبی دارد، اما در سطوح بالای استفاده اثر بازدارندگی دارد و قادر به تخلیۀ مطلوب رطوبت نیست. | ||
| کلیدواژه‌ها | ||
| پلیمر جاذب رطوبت؛ رطوبت قابل استفادۀ گیاه؛ منحنی مشخصۀ رطوبتی خاک | ||
| عنوان مقاله [English] | ||
| Effect of Aquasource Polymer on the Hydro-Physical Properties of Different Soils | ||
| نویسندگان [English] | ||
| Saloome Sepehri-Sadeghian1؛ Nader Abbassi2؛ Mohammad Mehdi Nakhjavani3 | ||
| 1Assistant Professor of Irrigation and Drainage Engineering, Agricultural Engineering Research Institute (AERI), Agricultural Research, Education and Extension Organization (AREEO), Karaj, Iran. | ||
| 2Professor, AERI | ||
| 3Agricultural Engineering Research Institue, Agricultural Research, Education and Extension Organization (AREEO), Karaj, Iran | ||
| چکیده [English] | ||
| Introduction Today, one of the most important challenges of the present and the future, especially in the arid regions of the world, is the issue of water shortage and in some cases the water crisis. One of the ways to improve water productivity and better water management in agricultural sector as the largest consumer of water is the use of super-absorbent materials to improve soil texture, increase soil water retention, reduce erosion and increase germination. The aim of this study is to evaluate the effect of Aquasource superabsorbent polymer on physical parameters and soil-water characteristic curves (SWCC) of different soil textures. Methodology Aquasource is a new generation of potassium-based superabsorbent polymers that are biodegradable and free of destructive acrylamide compounds. In order to evaluate the effect of Aquasource hydrogel on hydro-physical properties of soils, some experiments in the form of a completely randomized design with 3 replications was performed. The first factor was different levels of superabsorbent (0, 0.5, 1 and 2% by weight of superabsorbent/soil) and the second factor was three different soil textures (sandy-loam, clay-loam and silty-clay). SWCCs related to all treatments were determined by determining the moisture content of the samples at different pressures (0, 0.3, 0.5, 1, 3, 6, 9 and 15 bars) using a pressure plate device. Then, to obtain the soil moisture characteristic curve parameters in each sample, two softwares RETC (v.6.02) and Rosetta (v. 1.1) were used. Results and Discussion The results of variance analysis and mean comparisons based on Duncan's test showed that in all soil textures studied, the application of superabsorbent and the increase Aquasource amounts, increased the moisture contents at the field capacity and permanent wilting point. However, the highest amount of soil available water for plant use in sandy loam, clay loam and silty clay textures was 9.8%, 13.8% and 12.7%, respectively, and they are related to the use of 0.5% w/w of superabsorbent in these treatments (Fig. 1). The use of larger amounts, up to 2%w/w, reduced the soil available water for plant use. This issue can be related to the reducing the interaction of soil particles and polymers with increasing the amount of superabsorbent application in soil. At high levels of superabsorbent consumption, the contact of the hydrogel with the soil particles is reduced, followed by the aggregation of the superabsorbent. This prevents the proper exchange between the superabsorbent and the surrounding soil, and thus despite the presence of moisture in the soil-superabsorbent system, this moisture cannot be used for the plant, so that in all three soil textures the lowest amount of plant available water belongs to the treatments of 2% w/w of Aquasource. The results of statistical analysis for estimating the parameters of the soil-water characteristic curve due to the application of different levels of superabsorbent in different soil textures using two software RETC (v.6.02) and Rosetta (v. 1.1) showed that the fit The Van-Genuchten (Moallem) model in RETC software in all treatments has provided a good approximation of the parameters of the soil-water characteristic curve (R2> 0.98). Also, with increasing the amounts of superabsorbent, the accuracy of the model in estimating the parameters decreased to some extent. Conclusions Application of Aquasource superabsorbent and increasing the application level of this superabsorbent polymer (from 0 to 2% by weight of superabsorbent/soil) in sandy-loam, clay-loam and silty-clay soil textures caused an increase in the moisture content at field capacity and permanent wilting point. Application of 2% W/W in sandy-loam, clay-loam and silty-clay soil textures increased the moisture content at the field capacity by about 2.4, 1.6 and 1.5 times, respectively, compared to the control treatments of each soil textures. However, the highest amounts of plant available water in all three soil textures were obtained by applying 0.5% W/W (superabsorbent/soil). Application of 0.5% W/W in sandy loam, clay loam and silty clay textures increased the plant available water by about 1.23, 1.19 and 1.12 times compared to the control treatments in each soil textures, respectively. However, the use of larger amounts reduced the plant available water. At low levels of Aquasource application, the interaction between the superabsorbent polymer and the soil particles in the soil/polymer system facilitates the transfer of moisture stored in the superabsorbent to soil particles. However, increasing the application level of this polymer up to 2% W/W has an inhibitory effect and in this case, the interaction between the polymer and soil particles is reduced, which leads to a lack of proper drainage of moisture from the polymer. Acknowledgement The authors would like to thank Agricultural Engineering Research Institute for supporting this research. | ||
| کلیدواژه‌ها [English] | ||
| Moisture absorbing polymer, Available water, Soil-Water Characteristic Curve | ||
| مراجع | ||
|
Abedi-Koupai, J. & Sohrab, F. (2004). Evaluating the application of superabsorbent polymers on soil water capacity and potential on three soil textures. Iranian Journal of Polymer Science and Technology, 17(3), 163-173. (in Persian) Parvanak-Boroujeni, K. & Abedi-Koupai, J. (2009). The effect of super AB-A200 hydrogels on porosity, water holding capacity and hydraulic conductivity of soil in the field. Plant and Ecosystem, 5(18), 102-118. (in Persian) | ||
|
آمار تعداد مشاهده مقاله: 1,634 تعداد دریافت فایل اصل مقاله: 435 |
||