Related Links
Effect of storage and bleaching of cotton fiber pulp on the stability of Bond paper optical properties | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 6, Volume 34, Issue 2 - Serial Number 67, August 2019, Pages 217-227 PDF (924.86 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2019.122765.1489 | ||
| Authors | ||
| ali ghasemi chahrdehi1; Esmaeil Rasooly Garmaroody* 2; Omid Ramezani3; ghasem asadpour4 | ||
| 1M.Sc. graduated student of Pulp and paper industries, Dept. of Bio-Refinery, Shahid Beheshti University, Zirab Campus, Savadkooh, Mazandaran, Iran | ||
| 2Assistant Professor, Dept. of Bio-Refinery, Shahid Beheshti University, Zirab Campus, Savadkooh, Mazandaran, Iran | ||
| 3BioRefinery Dept., Faculty of New Technologies and Engineering, Zirab Science and Research Campus, Shahid Beheshti University, Tehran, Iran | ||
| 4Associate Professor, Department of Wood and Paper, Faculty of Natural Resources, Sari University of Agricultural Sciences and Natural Resources, Iran | ||
| Abstract | ||
| The aim of this study was to investigate the effect of storage and bleaching of cotton fiber on stability of optical properties of Bond paper. For this aim, industrial unbleached cotton fiber pulp with freeness 13°SR, in two types of fix and agitating was stored for 3-15 days in room temperature and after that bleached with hydrogen peroxide. Then, standard handsheets was made from bleached pulp and after air-dried, aged in UV and thermal methods and measured their optical properties. Results showed that agitated samples have more brightness and whiteness and less yellowness than fixed ones and by increasing of storage time this numbers be much and less, respectively. In case of UV treated samples, the brightness and opacity of fixed samples decreased and agitated ones increased. The brightness of fixed and agitated samples with thermal treatment showed up and dawn trend, respectively. Also, UV and thermal treatments, especially in fixed samples lead to much yellowness and much whiteness in agitated ones. Therefore, agitated storage method better than the fixed one so that before and after bleaching present suitable optical properties. In addition, paper made from agitated storage samples has more desirable characteristics and influence of temperature more than UV in present and longtime. | ||
| Keywords | ||
| cotton fiber; fixed storage; agitated storage; H2O2 bleaching; brightness reversion | ||
| References | ||
|
Castellan, A. and Grelier, S., 2016. Color and Color Reversion of Cellulosic and Lignocellulosic Fibers: 531–552. In: Belgacem, N. and Pizzi, A., (Eds.). Lingnocellulosic Fibers and Wood Handbook. Scrivener Publishing LLC, Massachusetts, 704p. Chirat, C. and Chapelle, D., 1999. Heat and light induced brightness reversion of bleached chemical pulps. Journal of Pulp and Paper Science, 25(6): 201-205. Enberg, S., Rundlöf, M., Paulsson, M., Johnsen, I. A. and Axelsson, P., 2013. The influence of process conditions during pulp storage on the optical properties of Norway spruce mechanical pulps. Nordic Pulp & Paper Research Journal, 28(2): 203-210. Fras, L., Stana-Kleinschek, K., Ribitsch, V., Sfiligoj-Smole, M., and Kreze, T., 2002. Quantitative Determination of Carboxyl Groups in Cellulose by Complexometric Titration, Lenzinger Berichte, 81: 80-88. Gharehkhani, S., Sadeghinezhad, E., Newaz Kazi, S., Yarmand, H., Badarudin, A., Safaei, M. R., and Zubir M. N. M., 2015. Basic effects of pulp refining on fiber properties-A review. Carbohydrate Polymers, 115: 785–803. Ghasemi, S. and Behrooz, R., 2011. The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp. , Iranian Journal of Wood and Paper Science Research, 26(2): 398-409. (In Persian). Granström, A., Eriksson, T., Gellerstedt G., Rööst, C. and Larsson, P., 2001. Variables affecting the thermal yellowing of TCF bleached birch kraft pulps. Nordic Pulp and Paper Resarch Journal, 16(1): 18-23. Harris, G. and Karnis A., 1986. Storage of latent mechanical pulps, Journal of Pulp and Paper Scence, 12(4): 100. Heitner, C. R., Dimmel, D. A. and Schmidt, J., 2010. Lignin and Lignans. Advances in Chemistry. By Taylor and Francis Group, LLC. CRC Press. Boca Raton London New York. 636 pages. Heitner, C., 1996. Chemistry of brightness reversion and its control: 183–212. In: Pulp Bleaching: Principles and Practice (C. Dence and D. Reeve, (eds), TAPPI Press, Atlanta, 880p. Johnsen, I. A., Narvestad, H., Axelsson, P., Enberg, S., Aasarød, K. and Kure, K-A., 2010. Metal induced brightness loss of peroxide bleached TMP. 7th International Seminar on Fundamental Mechanical Pulp Research, Nanjing, China, 20-26 June, Nanjing, China: 211-218. Kennedy, J. F., Philips, G. O., Williams, P. A. and Lonnberg, B., 2000. Cellulosic pulps, fiber and material. Published by Woodhead Publishing Ltd, Abington, Cambridge CBI, England. 352 pages. Klemn, D., Philipp, B., Heinze, T., Heinze, U., and Wagenknecht, W., 1998. Comprehensive Cellulose Chemistry Volume 2: Functionalization of Cellulose. WILEY-VCH Verlag GmbH, Weinheim, 389p. Lunan, W. E., Sferrazza, M. J., Fransén, R.G. and May, W. D., 1986. Curl-setting during storage of thermomechanical pulp at high consistency, Journal of Pulp and Paper Science, 12(4): 108. Marques, G., Rencoret, J., Gutiérrez, A., and Del Río, J. C., 2010. Evaluation of the chemical composition of different non-woody plant fibers used for pulp and paper manufacturing. Agriculture Journal, 4: 93-101. Narvestad, H., Axelsson, P., and Kure, K-A., 2011. Full scale experiences with magnesium hydroxide based peroxide bleaching and TMP brightness loss at Norske Skog Saugbrugs, International Mechanical Pulping Conference, China, 26-29 June: 287-290. Narvestad, H., Gregersen, Ø.W., and Kure, K-A., 2013. Filler clay induced discolouration of bleached mechanical pulp. Nordic Pulp and Paper Research Journal, 28(1): 68. Potthast, A., Rosenau, Th., Kosma, P., Saariaho, A. and Vuorinen, T., 2005. On the nature of carbonyl groups in cellulosic pulps. Cellulose, 12: 43–50. Ragauskas, A. J., 2007. Basics of Bleaching Chemical Pulps. Institute of Paper Science and Technology Georgia Institute of Technology. 58p. Rasooly Garmaroody, E. (2011). The effect of wood biological pre-treatment on kraft pulp and paper properties of hornbeam and poplar, PhD thesis of pulp and paper scince and technology, Dept. of pulp and paper, Gorgan university of agricultural sciences and natural resources, Gorgan, 155p. Rasooly Garmaroody, E., Fooladi, Djafari Petroudy, S.R. (2017). Effffectt off ffungall pre--ttreattmentt off popllar chiips on paper briighttness reversion. Iranian Journal of Wood and Paper Industries, 7(4): 625-635 Rasooly Garmaroody, E., Mohammadi, E., Jalali, H., Razzaghi, A. A., (2015). Improvement in reactivity of alpha cellulose pulp by sono-chemical method. Iranian Journal of Chemistry and Chemistry Engineering, 34(1):59-68. Rasooly Garmaroody, E., Resalati, H., Fardim, P., Hosseini, S. Z., Rahnama, K., Saraeeyan, A. and Mirshokraee, S. A., 2011. The effects of fungi pre-treatment of poplar chips on the kraft fiber properties, Bioresource technology, 102: 4165-4170 Shaw, M. B. and Bicking, G. W., 1926. Research on the Production of Currency Paper in the Bureau of Standards Experimental Paper Mill. Technologic Papers of the Bureau of Standards, 89:89-108. Suess, U., 2010. Pulp bleaching today. Walter de Gruyter GmbH & Co. KG, Berlin/New York, 310p. Temming, H., Grunert, H. and Huckfeldt, H., 1973. Temming-linters. Published by peter temming AG .Gluckstadt. Germany. 183p. Wakelyn, Ph. J., Bertoniere, R., French, D., and Thilbodeaux, D. N. P., 2007. Cotton fiber chemistry and technology. CRCpress, Florida, 170p. Yin, C., Huang, Y., Zhang, L., Xu, H., Zhong, Y. and Mao, Zh., 2014. Low-temperature bleaching of cotton fabric using a copper-based catalyst for hydrogen peroxide, Coloration Technology, 131: 66–71. Yun N. and He, B., 2017, Photo-induced yellowing of Mg(OH)2-based peroxide bleached deimked pulp, BioResorces, 12(3): 5236-5248. | ||
|
Statistics Article View: 462 PDF Download: 373 |
||
Journal management system. designed by sinaweb