
Investigating on the possibility of making particleboard from lignocellulosic sources on southern of Iran (Potential for using wood tamarix in particleboard industries). | ||
تحقیقات علوم چوب و کاغذ ایران | ||
Article 1, Volume 7, 7-No. 199, December 1998, Pages 1-45 | ||
Document Type: Research Paper | ||
DOI: 10.22092/ijwpr.1998.117482 | ||
Authors | ||
Amir Nourbakhsh1; Abdolrahman Hosseinzadeh2; Abolfazl Kargarfard3; Hossein Hosseinkhani4; Kamyar Salehi5 | ||
1Wood and Paper Science Research Division, Research Institute of Forests and Rangelands , Iran, | ||
2Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Resear | ||
3Wood and Forest Products Science Research Division, Research Institute of Forests and Rangelands, Tehran, Iran, | ||
4Wood Science & Forest Products Research Division Research Institute of Forests & Rangelands Tehran, Iran | ||
5MSc., wood and paper, Research Institute of Forests and Rangelands | ||
Abstract | ||
The physical and mechanical properties were determined of particleboards produced from Tamarix wood using 3 resin contents (9, 10 and 11%) and 3 pressing times (5, 6 and 7 min). Other factors such as resin type, hardener type, closing press time, mat moisture and board density (etc.) were assumed invariable. Three boards were. produced for each combination of the 2 variable types. Based on DIN-68763 standard physical and mechanical properties including modulus of rupture (MOR), modulus of elasticity (MOE), internal bond (IB) strength and thickness swelling after 2 and 24 h immersion in water (TS2 and TS24) were tested. The best results were obtained with 11% resin and 6 min pressing time. | ||
References | ||
| ||
Statistics Article View: 323 |