Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 5, Volume 23, Issue 1 - Serial Number 28, March 2008, Pages 50-62 PDF (427.4 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2008.117404 | ||
| Authors | ||
| Ali Akrami* 1; Kazem ِDossthoseini2; Ahmad Jahan latibari3; Mohammad mehdi Faezipoor4 | ||
| 1Wood Science, Faculty of Natural Resources, Univ. of Tehran | ||
| 2Professor , Faculty of Natural Resources, Univ. of Tehran | ||
| 3Associate Professor, Islamic Azad University, karaj. | ||
| 4Professor , Faculty of Natural Resources, Univ. of Tehran. | ||
| Abstract | ||
| In this investigation, the effect of paraffin content and press time and temperature on practical properties especially surface roughness of particleboard is studied. The variables such as paraffin content at 0, 1& 2 percent, press temperature at 170° and 180° C and press time of 4 and 5 minutes were investigated. Modulus of rupture, modulus of elasticity, shear strength, water absorption and thickness swelling after 2& 24 hours soaking in water & surface roughness were measured. The results indicate that there is no significant difference on the influence of paraffin content on either MOR & MOE of the particleboard. But increasing paraffin content decreased shear strength of panels. However, addition of paraffin reduced water absorption and thickness swelling. Press temperature had no significant influence on measured properties, but this variables increased surface roughness. Increasing press time, improved MOE, but showed no significant influence on other properties. | ||
| Keywords | ||
| Particleboard; Paraffin; press temperature; press time; physical properties; Mechanical Properties and surface roughness | ||
| References | ||
|
دوست حسینی، کاظم ،1380 . فناوری تولید و کاربرد صفحات فشرده چوبی، انتشارات دانشگاه تهران. دوست حسینی، کاظم و روشنی زرمهری، علی اکبر، 1374. بررسی امکان استفاده از چوب تاغ در صنایع تخته خرده چوب، مجله منابع طبیعی ایران، شماره 40. طبرسا، تقی، 1367، بررسی تاثیر رطوبت کیک خرده چوب، درجه حرارت و زمان پرس بر کیفیت تخته خرده چوب راش و پلیمر شدن رزین اوره فرم آلدهید، پایان نامه کارشناسی ارشد، دانشکده منابع طبیعی، دانشگاه تهران. کاشانی زاده، محسن، 1367. بررسی اثر 4 عامل مهم تولید بر کیفیت تخته خرده چوب ساخته شده از ضایعات صنایع روکش و تخته لایه (گونه راش)، پایان نامه کارشناسی ارشد، دانشکده منابع طبیعی، دانشگاه تهران. Amthor. J & P. Böttcher, 1984. The influence of hydrophobing on the surface characteristics of particleboard under short term water exposure. Holz asl Roh-und Werkstoff Journal. 142(10):379-83. Hsu H.H, Melanson & Kozak, 1990. The effect of wax type and content on waferboard properties. In: Proceedings,24thWashingtonStateUniversity international Particleboard / Composite Materials Symposium, T.Maloney, ed., WashingtonStateUniversity, Pullman, WA. Nemli G, E Zekovic & I Aydin. 2007. Some of the parameters influencing surface roughness of particleboard. Bulding and Enviroment Journal . 40(10): 1337-1340. Suzuki H, H Takahashi & K Endoh, 1976 . On water absorbability of dry procces fiberboard. Mokuzai Gakkaishi. 22(10):557-563. Winnistofer, P.M., D.L. McFarland, and R.C Slover, 1992. Evaluating the performance of ten wax formulations and three application rates on properties of oriented strandboard. Proceedings, 26th Washangton State University international particleboard/ composite material symposium | ||
|
Statistics Article View: 1,379 PDF Download: 469 |
||
Journal management system. designed by sinaweb