
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues | ||
تحقیقات علوم چوب و کاغذ ایران | ||
Article 2, Volume 27, Issue 2 - Serial Number 39, June 2012, Pages 202-211 PDF (208.86 K) | ||
Document Type: Research Paper | ||
DOI: 10.22092/ijwpr.2012.117061 | ||
Authors | ||
Hassan Ziaei Tabari* 1; Amir Nourbakhsh2; Habibollah Khademi Eslam3; behzad baziyar4 | ||
1PhD student, Department of Wood and Paper Science, Science and Research Branch, Islamic Azad university, Tehran. | ||
2Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Resear | ||
3Department of wood and paper science and technology, College of Agriculture and natural resources, Science and research Branch, Islamic Azad University, Tehran - Iran. | ||
4Assistant Professor, Wood and Paper Science and Technology Department, Islamic Azad University –Science and Research branch of Tehran | ||
Abstract | ||
The aim of this study was to investigate the potential of using reed flour and different contents of montmorillonite (nanoclay) nanoparticles on the physical and tensile properties of polypropylener/reed flour/nano clay composite. The amount of coupling agent and reed flour was constant at 5% and 40%, respectively and nanoclay content, adjusted at four levels of 0, 1, 3 and 5% were considered. The materials were mixed in an internal mixer and the samples were prepared by injection molding method. The specimens were tested in accordance with EN ISO 527 standard test method for tensile properties (tensile strength and module) and elongation at break. Physical properties such as water absorption and thickness swelling were measured. The results of tensile moduli and strengths, elongation at break and physical properties (water absorption) showed improvement by the addition of nanoclay up to 3%. | ||
Keywords | ||
Composite; reed flour; Polypropylene; Nanoclay; tensile properties; physical properties | ||
References | ||
- بیگدلی، احمد.، نازک دست، حسین.، ملک نیا، لاله.، 1386. تهیه و بررسی ساختار و خواص الیاف پلی اتیلن ترفتالات تقویت شده با نانو. دومین همایش دانشجویی فناوری نانو.14-16 شهریور. - جعفری نژاد، شهریار.، ابوالقاسمی، حسین.، احمدی، سید جواد.، 1386. تولید و بررسی خواص نانو چندسازههای پلی الفین- خاک رس به روش پلیمریزاسیون درجا و مقایسه آن با روش مذاب. دومین همایش دانشجویی فناوری نانو.14-16 شهریور. - حسین احمدی، محمد.، نازکدست، حسین.، 1386. بررسی اثر ترتیب خوراک دهی بر ریز ساختار نانو چندسازههای بر پایه پلی اتیلن / خاک رس. دومین همایش دانشجویی فناوری نانو. 14-16 شهریور. - ذبیح زاده، سید مجید.، 1384. بررسی خصوصیات حرارتی، مکانیکی و ریخت شناسی کامپوزیت چوب پلاستیک. رساله دکتری، دانشکده کشاورزی و منابع طبیعی، دانشگاه تهران. - فارسی، محمد.، 1387. تحلیل دینامیکی- مکانیکی - حرارتی چند سازههای ساخته شده از پلیپروپیلن و ضایعات کشاورزی. پایان نامه دکتری. دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران. - فامیلیان، حسین.، پارسا پژوه، داود.، حسین زاده، عبدالرحمن.، لتیباری، احمدجهان. 1375، بررسی مقایسهای خصوصیات بیولوژیکی، آناتومیکی، فیزیکی و شیمیایی نی در نیزارهای هوالعظیم و تالاب انزلی. تحقیقات چوب و کاغذ 2 . صفحه 1- 113. - کرد، بهزاد.، 1387، بررسی خصوصیات فیزیکی، مکانیکی و ریخت شناسی کامپوزیت هیبریدی آرد چوب-پلیپروپیلن و نانو فیلر. رساله دکتری، دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران. - مدهوشی، محراب.، دهمرده قلعه نو، محمد.، طبرسا، تقی.، 1387. مقاومت اتصال داخلی، واکشیدگی ضخامتی و مقدار جذب آب تخته خرده 3 لایه ساخته شده از مخلوط نی (لایه سطحی) و گونههای تجاری (لایه میانی). اولین همایش ملی تامین مواد اولیه و توسعه صنایع چوب و کاغذ کشور. 12 و 13 آذر. - Ashori, A., Nourbakhsh, A., 2009. Characteristics of wood–fiber plastic composites made of recycled materials. Waste Management 29. pp: 1291–1295. - Chowdhury, F.H, M.V, Hosur., S. Jeelani., 2006. Studies on the flexural and thermomechanical properties of woven carbon/nanoclay-epoxy laminateds. Material Science and Engineering A (421), pp: 298-306. - Lu, J.Z., Wu, Q., and McNabb, H.S., 2000. Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments. Society of Wood Science and Technology State-of-the-Art-Review. Vol. 32. No. 1. pp: 88-104. - Matuana L.M., Faruk O., 2008. Nanoclay reinforced HDPE as a matrix for wood-plastic composites. Composites Science and Technology 68, pp: 2073–2077. Sharma S.K. & 13. Nayak S.K., 2008. Surface Modified Clay/Polypropylene (PP) Nanocomposites: Effect on Physicomechanical, Thermal and morphological Propertie. Volume 94, Issue 1, January 2009, Pages 132-138. - Wang, H., C, Zheng., M, Elkovitch., L.J, Lee and K.W, Koelling., 2001. Proocessing and properties of polymeric nanocomposites, Polymer Engineering Science 41(11), pp: 236-246. - Wang, L., K, Wang., L, Chen., Y, Zhang., C, He., 2005. Preparation, morphology and thermal/mechanical properties of epoxy/ nanoclay composite. | ||
Statistics Article View: 1,232 PDF Download: 362 |