Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 13, Volume 33, Issue 3 - Serial Number 64, September 2018, Pages 453-465 PDF (506.92 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2018.120242.1454 | ||
| Authors | ||
| Ali Hasanpoor tichi* 1; Behzad Baziyar2 | ||
| 1Assistant Prof, Dep. of Wood Science and Engineering, Technical Faculty of No. 2, Mazandaran Branch, Technical and Vocational University (TVU), Sari, Iran | ||
| 2Dept. of Wood and Paper Science and Technology, Islamic Azad University(IAU), Tehran, Iran | ||
| Abstract | ||
| In this study the effect of nano gel wollastonite usage in three level (0 , 5 and 10 percent per dry by weight of the cement) and the mixture ratios of lingocellulosic material to cement in three level 10:90, 20:80 and 30:70 on physical, mechanical , microscopic and biological properties of composite made from rice straw fibers- cement was investigated. Three replicates for each treatment and 27 experimental boards were manufactured. Specimens were prepared according to DIN- EN634 standard test methods to measure mechanical and physical properties. Mechanical and physical properties including static bending strength, modulus of elasticity, interior bonding(IB),water absorption after 2 and 24 hours immersion in the water , density and decay resistant (loss weight) were measured. Micro- structural properties of composites were evaluated by SEM images. The results showed that, bending strength , modulus of elasticity , interior bonding and density were significantly increased with increasing Nano gel wollastonite . Also, with increasing Nano gel wollastonite , dimensional stability and decay resistance were increased in comparison with the control sample. Results of scanning electron microscopy showed that the calcium hydroxide formed hydrated calcium silicate gel (C-S-H gel) after addition the Nano gel wollastonite . SEM images showed that the micro- structure of the boards were improved by increasing the nano- wollastonite content. | ||
| Keywords | ||
| Cement; Rice straw; Density; Nano gel wollastonite | ||
| References | ||
|
-Boshehrian, A. and Hosseini, P., 2011. Effect of nano-SiO2 particles on properties of cement mortar applicable for ferrocement elements. Concrete Research Letters, 2(1): 15-20. -Ciullo, P.A., 1997. Industrial minerals and their uses. Noyes, United States of America, 640p. -Doosthoseini, K. and Yazdi, M., 1996. The effects of chemical additives on the binding quality of Portland cement and aspen particles. Iranian Journal of Natural Resources, 48 (1): 47-58. -Doosthoseini, K., 2007. Wood composite materials manufacturing, applications. University of Tehran, Tehran, 648p. -DIN EN standard, NO. 634, 1995. Cement-bonded Particleboards. Specifications- general requirements; German version. -Haghighi, A., Taghiyari, H.R. and Karimi, A.N., 2013. Study on fire-retardant properties of nano-wollastonite in fir wood (Abies alba). Iranian Journal of Wood and Paper Science Research, 28(2): 258-265. -Halvarsson, S., Ediund, H. and Norgren, M., 2009. Manufacture of High-Performance Rice-Straw Fiberboards. Industrial & Engineering Chemistry Research, 49(3): 1428–1435 -Hosseinpourpia, R., Varshoee, A., Soltani, M., Hosseini, P. and Ziaei Tabari. H., 2011. Production of waste bio-fiber cement-based composites reinforced with nano-SiO2 particles as a substitute for asbestos cement composites. Journal Construction and Building Materials, 31: 105–111. -Hassanpoortichi, A., Bazyar, B., Khademieslam, H., Rangavar, H. and Talaeipour, M., 2016. The effect of nano-wollastonite on biological, mechanical, physical, and microstructural properties of the composite made of wood-cement fiber. Journal of Fundamental and Applied Sciences, 8(35): 1466–1479. -Hassanpoortichi, A., Bazyar, B., Khademieslam, H., Rangavar, H. and Talaeipour, M., 2015. Effect of nano-wollastonite on microscopic, mechanical and physical properties of cement-wood fibers composite. Iranian Journal of Wood and Paper Science Research. 3(4): 567–577. (In Persian). -Karade, S.R., 2010. Cement-bonded composites from lignocellulosic wastes. Construction and building materials, 24(8): 1323-1330. -Khosrviyan, B., 2009. The study of mechanical, physical, thermal and morphological properties of hybrid multi- structures and nano hybrid polypropylene wood flour/ wollastonite multi- structures. M.S. thesis, Department of Natural Resource, The University of Tehran, karaj, 103p. -Li, H., Xiao, H. and Ou, J., 2004. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials. Cement and Concrete Research, 34(3): 435-438. -Luyt, A.S., Dramicanin, M.D., Antic, Z. and Djokovic, V., 2009. Morphology, mechanical and thermalproperties of composites of polypropylene and nanostructured wollastonite filler. Polymer testing, 28: 348-356. -Mohammad Kazemi, F., 2010. Investigation of the effect of nano- SiO2 on applied properties of wood-cement boards manufactured by old corrugated container(OCC) and rice husk. M. S. thesis, Department of Natural Resource, The University of Tehran, karaj, 84p. -Rangavar, H., Kargarfard, A., and Hoseiny Fard, MS., 2016. Investigation on Effect of cement Types on the cement hydration and properties of wood-cement composites manufactured using sunflower stalk (Helianthus Annuus) Iranian Journal of Wood and Paper Science Research, 31 (2), 336 – 348. (In Persian) -Rowell, P.M., Youngquist, J.A. and Mcnatt, D., 1991. Agricultural fibers in composition panels. In Proceedings of the 27th International Particleboard Composite Materials Symposium.USA, 9-11 April:301-314. -Sandermann, W. and Kohler, R., 1964. Studies on inorganic- bonded wood materials. Part 4: A short test of the aptitudes of woods for cement-bonded materials. Holzforschung, 18: 53-59. -Soliman, A, M., 2011. Effect nano wollastonite for compression strength of concrete. Ph.D. thesis, Department of Civil and Environmental Engineering, The University of Western Ontario London, Canada, 410p. -Wen, L., Yu-he, D., Mei, Z., Ling, X. and Qian, F., 2006. Mechanical properties of nano-sio2 filled gypsum particleboard. Trans. Nonferrous Metals Society of China 16s. 361-364. | ||
|
Statistics Article View: 823 PDF Download: 595 |
||