Related Links
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 12, Volume 33, Issue 2 - Serial Number 63, July 2018, Pages 290-299 PDF (226.65 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2018.116361.1449 | ||
| Authors | ||
| Hossein Resalati1; Mostafa Nikkhah Dafchahi* 2 | ||
| 1Sari University of Agricultural Sciences and Natural Resources, province: Mazandran, Iran. | ||
| 2Ph.D Student in Pulp and Paper Industries, Sari University of Agricultural Sciences and Natural Resources | ||
| Abstract | ||
| One of the drawbacks of utilizing non-forest fast growing species of Poplar as raw materials to produce newsprint in Mazandran Pulp and Paper Mill is fairly low bulk and opacity of produced paper at the yield of 85% (current CMP yield of the Mill). In this research work, the effect of process parameters (cooking yield and freeness) on the optical and mechanical properties of chemi-mechanical pulp was investigated. The chemi-mechanical pulps of poplar was prepared at four various levels of cooking yield, through changing the cooking time, and their properties at different level of freeness were evaluated in comparison with the control sample of Mazandran Pulp and Paper Mill (75% hornbeam and 25% beech). Strength properties of the paper pulps stemmed from the cooking yields of 85.25% to 90.4% were higher and more favorable than the control sample. By contrast, the strength properties of the produced paper pulp from the cooking yield of 94.6% were inferior to prepared paper pulp from the control sample. According to the results, there is the possibility of significant improvement of the strength properties, opacity and bulk of the chemi-mechanical pulps of poplar trough controlling the process parameters like cooking yield and freeness to utilize it as raw material of newsprint production in Mazandran Pulp and Paper Mill. | ||
| Keywords | ||
| Poplar; chemi-mechanical pulp; Strength properties; Optical properties; newsprint | ||
| References | ||
|
-Asadpour Atouei, GH., Zahedi Tabarestani, A., Barzan A., Mangholi, M.T. and Ghazvini, Z., 2016. Investigation of the CMP Pulp Yield Variations on its Strength and Optical Properties, Journal of Forest and Wood Products, 69 (2): 397-406. -Boeva-Spiridonova, R. and Petkova, E., 2007. Utilization of Various Chemical Reagents and Additives for Production of Chemical-mechanical Pulp from Poplar Wood, Journal of the University of Chemical Technology and Metallurgy, 42(1): 41-44. -Goli, M., Asadpur, Gh., Mahdavi, S. and Barimani, A., 2015. Investigation on Combining Aspen Wood with two Native Hardwoods Species for Chemi-Mechanical Pulping, Iranian Journal of Wood and Paper Science Research,30 (4): 662-673. -Goli, M., Zabihzadeh, S.M., Asadpoor, Gh. and Barzan, A., 2016a. The effect of Mixing the Forest and Non-forest Hardwood Species on the Chemi-mechanical Pulp (CMP) Properties (Case study: Mazandaran Wood and Paper Industry), Journal of Wood & Forest Science and Technology, 23:2. 125-141. -Goli, M., Zabihzadeh, S.M., Asadpour Atoee, Gh. and Barzan, A., 2016b. Evaluation Alternative in MWPI'S Newsprint Production with Mixture of Species on the Properties of CMP Paper, Journal of Forest and Wood Products, 69(2): 615-624. -Hosseini, S.Z. and Mashalchiyan, M., 2008. The Comparison of Physical and Mechanical Specificity of Papers Made of Poplar (Populus Deltoides), Paulownia (Paulownia Fortunei) and their Mixture Wood, Using Chemi-Mechanical (CMP) Method, Journal of Agric. Sci. Natur. Resour.,15 (2): 42-48. -Hoseinzadeh, O. and Jahan Latibari, A., 2012. Investigation on the Influence of Pulping Conditions on -Johansson, A., 2008. Correlations between Fibre Properties and Paper Properties, master's thesis, Helsinki University of Technology. Royal Institute of Technology, 49 pages. -Kord, B., 2009. Effect of Refining Intensity on Pulp and Paper Properties Made of Eucalyptus -Nikkhah Dafchahi, M. and Resalati, H., 2012. Evaluation of Pre-hydrolyzed Soda-AQ Dissolving Pulp from Populus Deltoides Using an ODED Bleaching Sequence, BioResources, 7(3): 3283-3292. -Rajabi Kaboud Cheshmeh, O. and Vaysi, R., 2015. Investigation and Comparison of Paper Properties of Birch and Aspen CMP Pulp with the Beech and Horn Beam CMP Pulp, Journal of Wood & Forest Science and Technology, 22 (1): 17-30. -Rasouli Garmaroudi, A., Resalati, H. and Mahdavi Feizabady, S., 2007. Effect of Wood Raw Material Combination on the Properties of Chemi-mechanical Pulp for Making Newsprint, Pajouhesh & Sanzandegi, 76: 69-75. -Samariha, A., Khakifirooz, A., Nemati, M., Ravanbakhsh, F., Kiaei, M. and Saghafi, A., 2013. Newsprint from NSSC Bagasse Pulp Mixed with Hardwood CMP Pulp and Bleached Softwood Kraft Pulp, Bioresources, 8(4): 5561-5569. -Samariha, A., Nemati, M. and Hemmasi, A.H., 2011. Effects of Refining Intensity on Characteristics of Pulp Produced from Bagasse Through Neutral Sulfite Semi-Chemical Pulping, American-Eurasian J. Agric. & Environ. Sci., 11(1): 10-14. -Soleimani, A., Resalati, H. and Akbarpour, I., 2012. The Effect of Using White Birch on Mechanical Properties and Fiber Length Distribution of Mixed Hardwood CMP Pulp, Lignonocellulose. 1(2): 89-91. -Veisi, A. and Mahdavi, S., 2016. Mixing Bleached White Popular and Wheat Straw Chemimechanical Pulps to Improve the Mechanical and Optical Characteristics, BioResources 11(2): 2987–2997. -Ververis, C., Georghiou, K., Christodoulakis, N., Santas, P. and Santas, R., 2004. Fiber Dimensions, Lignin and Cellulose Content of Various Plant Materials and their Suitability for Paper Production, Industrial Crops and Products, 19: 245–254. | ||
|
Statistics Article View: 442 PDF Download: 439 |
||
Journal management system. designed by sinaweb