Related Links
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 4, Volume 32, Issue 2 - Serial Number 59, July 2017, Pages 193-204 PDF (382.28 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2017.109577 | ||
| Authors | ||
| Amir Homan Hemmasi1; mostafa kohantorabi* 2 | ||
| 1Department of Wood and Paper Science and Technology College of Agriculture and Natural Resources, Science and Research Branch, Islamic Azad University, Tehran, Iran | ||
| 2Ph.D Student, Department of Wood and Paper Science Islamic Azad University, Science and Research Branch, Hesarak, Poonak, Tehran | ||
| Abstract | ||
| In this study the relationship between dynamic modulus of elasticity from longitudinal vibration method with static modulus of elasticity and bending strength in two directions: the Parallel machine direction and machine direction have been investigated. For this purpose 4 plates of particleboard with dimensions 124× 90 ×1.6 cm (length× width× thickness) were selected and free longitudinal vibration test in PMD and MD were performed on each plates. After that the primary plates were cut to four plates with dimensions 62× 44 ×1.6 cm (length× width× thickness) and longitudinal vibration test in PMD and MD were performed on each plates again. Finally each plates were cut to the beams with dimensions 36× 1.6 ×1.6 cm and longitudinal vibration test and and static bending test were performed on them. The results show that good correlation between dynamic modulus of elasticity from longitudinal vibration test and static modulus of elasticity and bending strength (result of beams extracted from each plates) in both size of plates in two size (124× 90 ×1.6 and 62× 44 ×1.6 cm) and beams extracted from each plates in two directions (PMD and MD). In addition there was good correlation between dynamic modulus of elasticity of longitudinal vibration from two size plates (124× 90 ×1.6 and 62× 44 ×1.6 cm). When the samples smaller than primary plates, the dynamic modulus of elasticity values were increased, that it due to the diffusion of waves in samples with larger dimensions. In general, according to results of this research it can be concluded that by applying the appropriate correction factors, longitudinal vibration method an efficiency method for calculation of dynamic and static modulus of elasticity and estimate of the modulus of rupture in plates in full sized. | ||
| Keywords | ||
| Vibration; Plate; STATIC BENDING; Modulus of elasticity; Non-destructive | ||
| References | ||
|
-Alberktas, D. Vobolis., J .2004. Modeling and Stady of Glued Panel.Materials Science (medziagotyra).10: (4). 370-373 -ASTM Standards: 1037., 2007. Standard Methods for Evaluating the Properties of Wood –Based Fiber and Particleboard panel materials American Society of Testing and Materials, 146pp. -Ayarkwa, J. Hirashima, Y. and Sasaki, Y., 2001. Predicting modulus of rupture of solid and finger jointed tropical African hardwoods using longitudinal vibration, Forest Prod. J. 51(1), 85-92. -Ross, RJ., Pellerin, RF., 1994. Nondestractive Testing Assesing Wood Members in Strucyures. USDA Society Review. -Bodig, J., Jayne, B.A., 1993. Mechanics of wood and wood composites. Krieger Publishing Co, Malabar Florida. 712 pp. -Brancheriau, L., Bailleres, H., 2002. Natural vibration analysis of clear wooden beams: a theoretical review, Wood Science and Technology, 36: 347-365. -Brancheriau, L., 2011. Corrections For Poisson effect in longitudinal vibrations and shearing deformations in transverse vibrations applied to a prismatic orthotropic body. 205-223.Edi: Galloway,A., Mechanical Vibrations: Types, Testing and Analysis, Nova Science Publishers. 412pp. -Divos, F., Tanaka, H., Nagao, H., and Kato, H. 1998. Determination of shear modulus on construction size timber,” Wood Science and Technology32(6), 393-402. -Doust Hosseini, K. 2007. Production technology and application of wood compressed pages, Tehran University Press, Volume II, page 708. -European Standard EN 310, 1996. Wood based panels, determination of modulus of elasticity in bending and bending strength, European Standardization Committee, Brussell -European Standard EN 312. 2003.Particleboards-Specifications.European Committee for Standardization, Brussels, Belgium. -European Standard EN 319, 1996. Wood based panels, determination of tensile strength perpendicular to plane of the board. European Standardization Committee, Brussell. -Fenghu, W., Xiaodong, Z., 2007. Applications of wavelet transformation in the nondestructive test of medium density fiberboard., Frontiers of Forestry in China. 2(2): 227-230. -Ghasemi, H., Jahanlatibari, A., Roohnia, M., Kohantorabi., M. 2014. Investigating the Effect of Canola on Acoustic Properties of Particleboard. Iranian Journal of Wood and Paper Science Research., 29: (3).399-410 -Grundstrom, F., 1998. Non-desructive testing of wood with ultra sound eigen frequency method. Master ́s thesis of Science programme in Mechanical Engineering Wood technology. 64pp. -Hu, Y. Nakao, T. Nakai, J. Gu ,F., 2005. Dynamic properties of three types of wood-based composites; Journal of Wood Science and Technology; 51: 7-12. -ISIRI 9044. 1386, Wood – Wood-based panels –Particleboards – Specifications (Amendment No.1). 21pp. -Karlinasari, L., Hermawan, D., Maddu, A., Martianto, B., Lucky, LK., Nugroho., Hadi YS. 2012 Acostical Properties of Particleboards Made From Betung Bambo (dendrocalamus asper) as Building Construction Material. BioResources 7(4): 5700-5709 -Liu, ZY., Liu, H., Yuan, J., 2006. Measurement of the dynamic modulus of elasticity of wood panels; Holz als Roh- und Werkstoff; 4: 1-6. -Mirbolouk, P., and Roohnia, M., 2015. Dynamic modulus of elasticity in medium density fiberboard: Exciting the whole plate in longitudinal vibration. Bioresources, 10: (1): 613-621. -Ross, RJ. Pellerin,RF., 1994. Nondestructive Testing for Assessing Wood Members in Structures; USDA Society Review. -Roohnia, M., Kohantorabi, M., Jahan-Latibari, A., Tajdini, A. and Ghaznavi, M., 2012. Nondestructive assessment of glued joints in timber applying vibration-based methods. European Journal of Wood and Wood Products, 70: 791-799. -Vobolis, J., Albrektas, D., 2007. Analysis of Wood Peculiarities by Resonant Vibration Method. Baltic Foresty, 13(1):109-115. -Yoshihara¸H., 2010. Examination of the edgewise shear modulus of wood measured by dynamics squre-plate twist, BioRresourse, 6(4):4871-4885. -Zhiyong, C., Michael, O.H., Ross, R.J. 2000.Static and vibration modulus of elasticity of salvaged and new joists. For. Prod. J.,50: 35-40. | ||
|
Statistics Article View: 976 PDF Download: 556 |
||
Journal management system. designed by sinaweb