Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones

-Akrami, A., Barbu, M.C. and Fruehwald, A., 2014a. Characterization of properties of oriented strand boards from beech and poplar.EuropeanJournal of Wood and Wood Products, 72: 393-398. 

-Akrami, A., Fruehwald, A. and Barbu, M.C., 2014b. The effect of fine strands in core layer on physical and  mechanical properties of oriented strand boards (OSB) made of beech (Fagus sylvatica) and poplar (Populus  tremula). EuropeanJournal of Wood and Wood Products, 72: 521-525.

-APA, 2001. The Engineered Wood Association.

-Banoun, F., Morgan, D., Viart, M. and Zsuffa, L., 1984. The poplar: A multi-purpose tree for forestry  development. Unasylva (FAO) 36(3): 23-33.

-Bayatkashkoli, A. and Faegh, M., 2014. Evaluation of mechanical properties of laminated strand lumber and oriented strand lumber made from poplar wood (populus deltoides) and Paulownia (Paulownia fortunei) with  urea-formaldehyde adhesive containing nanoclay. International Wood Products Journal, 5 (4): 192-195

-Biblis, E.J., 1985. Properties of three-layer oriented strand board from southern hardwoods. Forest Products  Journal, 35(2): 28-32.

-Carino, H.F. and foronda, S.U., 1990. SELECT: A model for minimizing blank costs in hardwood furniture  manufacturing. Forest Products journal, 40(5): 21-36. 

-Casy, i.j., 1987. Changes in wood flake properties in relation to heat, moisture and pressure during flake board manufacture. M.Sc. thesis. Virginia State University, Blacksburg, Virginia. pp. 162.

-Dick, G., 2009. Wafer board and oriented strand board: The history and manufacturing practices. Technical Report 131 of Wood-Based Composites Center.

-DIN EN 300, 1997 E. Oriented Strand Board (OSB): Definitions, classification and specifications. English version  of DIN EN 300.

-Doosthoseini, K., 2007. Wood Composite Materials Manufacturing, Applications. University of Tehran, Iran.  705p.

-Doosthosseini. K. and Rowshani, A., 1997. Investigation the possibility of using Haloxylon sp. In particleboard manufacturing industry. Iranian Journal Of Natural Resources, 49: 87-96.

-Edalat, H.R., Faezipour, M.M., Doosthoseini, K., Tabarsa, T. and Mirshokraie, S.A., 2014. Evaluation of Penetration Effect of Phenol Formaldehyde Rrsin on Internal Bonding and Tensile Strength Parallel to Surface of  Oriented Strand Board. Journal of Wood and Forest Science and Technology, 21(1):149-163.

-EN 310:1993. Wood-based panels; determination of modulus of elasticity in bending and of bending strength.

-EN 317:1993. Particleboards and fibreboards; determination of swelling in thickness after immersion in water.

-EN 319:1993. Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board.

-EN 326-1:1994.Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces  and expression of test results.

-Eckenwalder, J.E. 1996. Systematics and evolution of Populus: 7–32. In: Stettler, R. F., Bradshaw, H. D., Jr., Heilman, P.E.  and Hinckley T.M.,  [Eds.], Biology of Populus and Its Implications for Management and Conservation. NRC Research Press, National Research Council of Canada, Ottawa, Ontario, Canada.

-FAO Reaport, Global Forest Resources Assessment Country Reports, 2015, FAO, http://www.fao.org/documents/card/en/c/74c6dc1c-f7b7-4030-97a0-6920fdbc8c20/.

-Faraji, F., 1993. Investigation of PF Resin Polymerization and comparison with UF Resin Polymerization in particleboard manufacturing. M.Sc. thesis, Natural Resources Faculty, Tehran University, 215p. (in Persian).

-Ghasemi, R.A. and Modir-Rahmati, A.R. 2004. Investigation on wood production of different poplar clones  (wide crown clones) in Karaj area. Iranian Journal of Forest and Poplar Research,12(2): 221-249.

-Geimer, R.l., 1976. Flake alignment in particleboard as affected by machine variables and particle geometry,  USDA Forest Service. Research Paper FPL, 275:1-16.

-Gunduz, G., Yapici, F., Ozcifci, A. and Kalaycioglu. H.,  2011. The Effects of Adhesive Ratio and Pressure Time on Some Properties of Oriented Strand Board; Bio Resources, 6(2): 2118-2124.

-Guse, L.M., 1995. Engineer Wood Products: The Future Is Bright ,Forest Product Journal, 45 (7/8): 17-24.

-Heebink, B.G.,1972. Irreversible Dimensional changes  in panel materials. Forest Product Journal.22(5):44-48.

-Heebink, B.G., 1972. Irreversible dimensional changes in panel materials. Forest Prod. J. 22:5. 44-48.

-Hrazsky, J. and Kral, P., 2011. Optimization of a Pressing Diagram in OSB Pressing, Dravna Industrija, 62 (1):  27-35.

-Iswanto, A.H., Azhar, I., Supriyanto, M. and Susilowati, A., 2014. Effect of resin type, pressing temperature and time on particleboard properties made from sorghum bagasse. Agriculture, Forestry and Fisheries, 3(2): 62-66.

-Jahanilomer, Z. and Farrokhpayam, S.R., 2015. Vertical density profile, a keyparameter for evaluating of

    particleboard quality. Journal of Wood and Forest Science and Technology, 21(4):1-21.

-Jime´nez L, Rodriguez A, Ferrer JL, Pe´rez A, Angulo V (2005( Paulownia, a fast growing plant, as a raw material

    for paper manufacturing. Afinidad 62:100–105.

-Kargarfard, A., 2003. Investigation on The Effect of Production Variables on Heat Transfer Mechanism During

    Particleboard Pressing. ph.D. thesis, , Department of Wood and Paper Science, Tehran Science and Research Branch,

    Islamic Azad University, Tehran.

-Kargarfard, A., 2011.The Effect of Resin Gradient and Press Time on the Physical and Mechanical Properties of

    Particleboard Produced from Citrus Tree Wood. Journal of wood and forest science and technology, 18(2): 25-40

-Kehr, E. and Schoelzel, S., 1966. The investigation of pressing conditions in the manufacture of particleboard.    

    USDA Translate.FPL-678.

-Kelly, S. S., Rials, T.G. and Glaser, W. G., 1987. Relaxation behavior of the amorphous components of wood.

    Journal of Materials Science, 22(2): 617-624.   

-Khial, B., Sadraie, N.S., 1984. Poplar pests investigation in Iran, Research Institute of Forests and Rangelands,

Tehran, Iran, 107pp (In Persian).

-Kord. B., Roohani, m. and KORD, b.R., 2015. Characterization and Utilization Of Reed Stem ASA lignocellulosic Resource for Particleboard Production. Maderas. Ciencia y tecnología, 17(3): 517 – 524.

-Kuhne,G., and Belimow,F., 1978. Ein Beitrag zur Analyse des Heisspressvorgangs dreischichtiger Mobelplatten II.Holzindustrie (2):50-52.

-Kuhne, G; Belimow, F., 1978. Analysis of the hot press process of furniture chip boards in 3 layers II. Holzindustrie 31 (2) 50-52.

-Kurt, R., and Cavus, V. 2011. Manufacturing of parallel strand lumber (PSL) from rotary peeled ybrid poplar I- 214 veneers with phenol formaldehyde adhesives. Wood Research, 56(1), 137-144.

-Lam, F., 2001; Modern structural wood productes, Prog. Strauct. Eng. Mat. 3(3), 238-245.

-Latibari, A.J., Hossienzadeh, A.B. and Tabarsa, T., 1996. Investigation on The Effect of UF Resin Polymerization Variables on Strength of UF Bonded Hornbeam Particleboard. Wood and Paper Research 1, Technical Publication 148:1-48.

-Liu, J.Y and McNatt, J.D., 1991; Thickness swelling and density variation in aspen flake boards,Wood Science and Technology, 25(1): 73-82.

-Mackes, K.H., and Lynch, D. L., 2001, The Effect of Aspen Wood Characteristics and Properties on Utilization, USDA, Forest Service Proceedings RMRS-P-18.

-Maloney, T.M, 1993, Modern Particle Board and Dry Process Fiberboard Manufacturing, San Francisco: MillerFreeman, Madison, WI: Forest Products Society.

-McNatt, J.D.; Bach, L.; Wellwood, R.W., 1992. Contribution of flake alignment to performance of strand board. Forest products Journal, Madison.v.42, n. (3), p.45-50.

-Mendes, L.M., Iwakiri, S., Matos, J.L.M., JR, S.K., and  Saldanha, L.K., jan./jul.2003. Effects of panels Density, Composition and Resin content on OSB panels properties,  Floresta  e Ambiente,.10(1):P.01-17.

-Moslemi, A.A., 1974. Particleboards. Volume I-materials and volume II technology. Southern Illinois University Press, IL 62902-3697, Carbondale, USA.

 -Nazerian,M., Beyki, Z., Mohebbi-Gargarii, R. and Kool, F., 2016. The effect of some technological production

variables on mechanical and physical properties of particleboard manufactured from cotton ("Gossypium hirsutum") stalks. Maderas: Ciencia y tecnología, 18(1): 167-178.

-Nemli, G., 2002. Factors Affecting The Production of E1 Type Particleboard. Turk Journal Agriculture Forestry, 26:31-36.

-Ramtin, A., Dadkhah Tehrani, B. and Doosthoseini, K., 2008. Investigation of press temperature and press time on physical and mechanical properties of OSB board made of Aspen. Iranian Journal of Wood and Paper Science Research, 23(1): 74-82.

-Rebollar, M., Perez, R. and Vidal, R., 2007. Comparison between oriented strand boards and other wood-based panels for the manufacture of furniture. Elsevier, Materials and Design, 28: 882-888.

-Reddy, N. and Yang, Y., 2009, Properties and potential applications of natural cellulose fibers from the bark of cotton stalks. BioResour Technology, 100(14):3563–3569.  

-Roffael, E. and Dix, B., 1988. Zur Bedeutung von schnellwüchsigen Baumarten als Rohmaterial für die Werkstoff, Holzwerkstoffherstellung unter besonderer Berücksichtigung von Pappelholz für Spanplatten. Holz Roh, 46(7): 245-252.

-Salari, A., Tabarsa, T., Khazaeian, A. and Saraeian, A., 2012. Effect of nanoclay on some applied properties of Sci., oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunei) wood. J Wood, 58: 513–524.

-Stanton, B.J., Eaton, J., Johnson, D., Rice, B., Schuette, B. and Moser, B., 2002. Hybrid poplar in the pacific northwest, the effects of market driven management. Journal of Forestry 100(4): 28-33.

-Stefka, V., 1999. Particleboard pressing process and transfer phenomena. TU Zvolen, 61p.

-Suzuki , s., and Takeda, k., 2000. Production and properties of Japanese oriented strand board. I: Effect of strand length and orientation on strength properties of  Sugi oriented strand board, journal Wood science, 46,289-295

-Tabarsa, T.; Chui, H. 2000. Wood behavior in transverse compression. Part1: apparatus and preliminary results. WoodandFiberScience 32(2):144-152.

-Thoemen, H., Irle, M. and Sernek, M. 2010. Wood-Based Panels. An Introduction for Specialists,Published by Brunel University Press, London, England.

-UN., 2011, Forest products annual market review, 2010-2011, United Nations Food and Agriculture Organization.

-Valentina, D., Ciobanu, O., Zeleniuc A. and Dumitrascu E., 2014The Influence of Speed and Press Factor on Oriented Strand Board Performance in Continuous Press. BioResources9 (4), 6805-6816

-Winandy, J.E and Kamke, F.A., 2004. Fundamentals of composite processing. Proceeding of a Workshop. Gen.Technical Report, FPL-GTR-149.Madison, WI: USDA. Forest Service. FPL. 118 P. 

-Yin, S., 1987. A study of the technology and properties of oriented bamboo strand board. Journal of Nanjing  Forestry University, 3: 65-72.

-Youngquist, J.A., 1999. Wood-based composites and panel products, Wood handbook: wood as an engineering material.

-Zhou, D., 1990. A study of oriented structural board made from hybrid poplar Physical and mechanical properties of OSB. Holz als Roh- und Werkstoff, 48: 293-296.

-Zoralioglu, T., 2003. Some statistical information concerning poplar wood production in Turkey, First International Conference on The Future of Poplar Culture, Italy.