| تعداد نشریات | 286 |
| تعداد نشریات سازمان | 84 |
| تعداد شماره‌ها | 2,980 |
| تعداد مقالات | 33,446 |
| تعداد مشاهده مقاله | 43,910,693 |
| تعداد دریافت فایل اصل مقاله | 20,409,988 |
تأثیر استفاده از آرد نخل خرما در ساخت کامپوزیت چوب-پلاستیک بر پایه پلی پروپیلن | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| مقاله 3، دوره 31، شماره 1 - شماره پیاپی 54، فروردین 1395، صفحه 30-39 اصل مقاله (753.14 K) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22092/ijwpr.2015.105771 | ||
| نویسندگان | ||
| علیرضا بی اذیت1؛ لعیا جمالی راد* 2؛ هدایت الله امینیان2؛ سحاب حجازی3 | ||
| 1کارشناس ارشد گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس | ||
| 2استادیار، گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس | ||
| 3دانشیار، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران | ||
| چکیده | ||
| در این تحقیق، تأثیر مقدار پرکننده و ماده جفت کننده MAPP بر ویژگی‌های فیزیکی و مکانیکی کامپوزیت پلی‌پروپیلن تقویت شده شده با آرد حاصل از ضایعات ناشی از هرس سالیانه برگ نخل خرما (رقم شاهانی) مورد مطالعه قرار گرفت. بدین منظور استفاده از سه سطح 30، 40 و 50 درصد آرد نخل خرما و دو سطح 4 و 6 درصد MAPP به عنوان عوامل متغییر در نظر گرفته شد. سپس خواص فیزیکی و مکانیکی نمونه‌های آزمونی شامل واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه وری در آب، مقاومت و مدول کششی، مقاومت و مدول خمشی و مقاومت به ضربه اندازه‌گیری شد. نتایج حاصل نشان داد که با افزایش آرد نخل خرما مقاومت خمشی، مقاومت کششی و مقاومت به ضربه کاهش و در مقابل واکشیدگی ضخامت، مدول خمشی، مدول کششی افزایش یافته‌اند. همچنین با بررسی اثر ماده جفت کننده مشخص گردید که با افزودن MAPP واکشیدگی ضخامت، مقاومت و مدول الاستیسیته کششی و خمشی کامپوزیت حاصل بهبود یافته است. این بدان معنی است که همراه با افزایش مصرف آرد نخل خرما، افزودن عامل جفت کننده منجر به بهبود کیفیت سطح مشترک شده و تغییرات قابل ملاحظه‌ای را خصوصا در پایداری ابعادی و مدول الاستیسیته حاصل کرده است. | ||
| کلیدواژه‌ها | ||
| کامپوزیت؛ پلی‌پروپیلن؛ آرد نخل خرما؛ جفت کننده؛ مدول الاستیسیته | ||
| عنوان مقاله [English] | ||
| The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite | ||
| نویسندگان [English] | ||
| Alireza Beiazyat1؛ Laya Jamalirad2؛ Hedayat alah Aminian2؛ Sahab Hejazi3 | ||
| 1M.Sc., Student, Department of Wood and Paper Science and Engineering, Faculty of Agriculture and Natural Resources, Gonbad Kavous University, Gonbad, I.R. Iran | ||
| 2Assistant Professor, Department of Wood and Paper Science and Engineering, Faculty of Agriculture and Natural Resources, Gonbad Kavous University, Gonbad, I.R. Iran | ||
| 3Associate Professor, Department of Wood and Paper Science and Engineering, Faculty of Natural Resources, University of Tehran, Karaj, I.R. Iran | ||
| چکیده [English] | ||
| In this research, the effect of the wood filler content and coupling agent (MAPP) on the physical and mechanical properties of Polypropylene reinforced with palm wood flour from the annual pruning of palm leaves (Shahani species) composite, were studied. For this purpose, the palm wood flour in three levels of 30%, 40%, 50% and two levels of Maleic anhydride grafted polypropylene 4% and 6% were used as variable factors. Then, the Physical and mechanical properties of samples, including thickness swelling after 2 and 24 hours of immersion in water, bending strength, bending modulus, tensile strength, tensile modulus and impact strength, were measured.The results showed that by increasing palm wood flour, the bending strength, tensile strength and impact strength were decreased but the thickness swelling, bending modulus, tensile modulus were increased. It was also found that by adding MAPP, thickness swelling, bending strength, bending modulus, tensile strength and tensile modulus were improved. The results revealed that at increased consumption of palm wood flour and adding coupling agent leads to improve quality of the interface and significant changes especially dimensional stability and MOE, are achieved. | ||
| کلیدواژه‌ها [English] | ||
| Composite, Polypropylene, Palm flour, Coupling agent, Modulus of Elastisity | ||
| مراجع | ||
|
-Andersons J., Sparninš E. and Joffe R., 2006. Stiffness and strength of flax fiber/polymermatrix composites. Polymer Composites, 27(2): 221-229. -Angelov, I., Wiedmer, S., Evstatiev, M., Friedrich, K. and Mennig, G., 2007.Pultrusion of a flax/polypropylene yarn. Compos Part A, 38(5): 1431–1438. -Bledzki, A.K. and Gassan, J., 1999. Composites reinforced with cellulose based fibers. Polymer Science, 24 (1): 221-274. -Borysiak, S., Paukszta, D. and Helwig, M., 2006. Flammability of wood polypropylene composites. PolymDegradStabil, 91: 3339–3343. -Bos, H.L., Mussig, J. and vandenOever, M.J.A., 2006. Mechanical properties of short-flax-fibre reinforced compounds. Compos Part A, 37: 1591–1604. -Ganster, J., Fink, H.P. and Pinnow, M., 2006. High-tenacity man-made cellulose fibre reinforced thermoplastics—injection moulding compounds with polypropylene and alternative matrices. Compos Part A, 37: 1796–1804. -Gholizadeh, M., Jamalirad, L., Aminian, H. and Hedjazi, S., 2015. Investigation on Mechanical Properties of polypropylene composite reinforced with tobacco stalk. Journal of Forest and Wood Products, 68(2): 261-272. -Grinia, M.N., Andrea, C.D.R., Carlos, A.P.L., Carlos, G., Olga, Z.H., Bronislaw, P., 2010. Preparation and characterization of ethanol-treated silk fibroin dense membranes for biomaterials application using waste silk fibers as raw material. BioresTechnol, 101(21): 8446–8451. -Joshi, S.V., Drzal, L.T., Mohanty, A.K. and Arora, S., 2004. Are natural fiber composites environmentally superior to glass fiber reinforced composites. Composites: Part A, 35: 371-376. -Kargarfard, A., 2013. The Infuence of coupling agent and the content of fibers on tensile strength and physical properties of cotton fiber stem/recycled polypropylene composites. Iranian Journal of Wood and Paper Industries, 3(2):131-140. -Khademi, R., Behseresht, R., and Farrar, N., 2006. Suitablemethods for plantresidue managing in Iran’s Palm grove. Bushehr Province Agricultural andNatural Resource Research Center. 23 p. -KhademiEslam, H., Yousefnia, Z., Ghasemi, E., and Talaeipoor, T., 2013. Investigating the mechanical properties of wood flour/ polypropylene/ nanoclay composite. Iranian Journal of Wood and Paper Science Research, 28(1): 153-168. -Khan, M.M.R., Masuhiro, T., Yasuo, G., Hideaki, M., Giuliano, F. and Hideki, S., 2010. Physical properties and dyeability of silk fibers degummed with citric acid. BioresTechnol, 101(21): 8439–8445. -Kim, S., Moonb, J., Kim, C.H., and Sikha, G., 2008. Mechanical properties of polypropylene /naturalfiber composites: Comparison of wood fiber and cotton fiber. Polymer Testing, 27:801–806. -Maladas, D., and Kokta, B. V. 1990. Effect of extreme conditions on the mechanical propertise of the wood fiber- polystyrene composites. LiSawdust as reinforcing filler. Polymer-PlasticsTechnology and Engineering, 29 (1-2): 119-165. -Mousavi, T., Rafiei, A. and Yoosefpour, M., 2014. Nutritional Value and Health Benefits of Dates According to Islamic Recourses and Traditional Medicine. Journal of MazandaranUniv Med Sci, 24(117): 247-265. -Mwaikambo, L.Y., Martuscelli, E. and Avella, M., 2000. Kapok/cotton fabric–polypropylene composites. Polym Test, 19: 905–918. -Oksman, K., Skrifvars, M. and Selin, J., 2003. Natural fiber as reinforcement in polylactic acid composites. Composite Science and Technology, 63(2): 113-120. -Rosa, S.M.L., Santosb, E.F., Ferreiraa, C.A., and Nachtigallb, S.M.B., 2009. Studies on the properties of rice-husk-filled-PP composites–effect of maleated PP. Materials Research, 12(3): 333-338. -Rowell, M.R., Lange, S.E., and Jacobson, R.E., 2000. Weathering performance of plant-fiber thermoplastic composites. Molecular Crystals and Liquid Crystals, 353: 85-94. -Rozman, H.D., Tay, G.S., Kumar, R.N., Abusamah, A., Ismail, H., MohdIshak, Z.A., 2001. Polypropylene-oil palm empty fruit bunch-glass fibre hybrid composites: A preliminary study on the flexural and tensile properties. EurPolym J,37: 1283-1291. -Seung-Hwan L, Siqun, W., George, M.P. and Haitao, X., 2007. Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis. Compos Part A, 38(6): 1517–1524. -Shinichi, S., Yong, C. and Isao, F., 2006. Lightweight laminate composites made from kenaf and polypropylene fibres. Polym Test, 25: 142–148. -Shubhra, Q., Alam, A., and Quaiyyum, M.A., 2011. Mechanical properties of polypropylene composites. Journal of Thermoplastic Composite Material, 26(3):362-391. -Srikanth, P., Shaoqin, G., Eric, O., Liqiang, Y. and Roger, M.R., 2009.Polylactide-recycled wood fiber composites. J App PolymSci, 111: 37–47. -Stark, N., 1997. Effect of species and particle size on properties of wood-flour filled polypropylene composites. USDA Forest Products Laboratory, 35(2): 167-174. -Stark, N.M., Rowlands, R.E., 2003. Effects of wood fiber characteristicson mechanical properties of wood/polypropylene composites. Wood andFiberScience, 35(2):167-174. -Zampaloni, M., Pourboghrat, F., Yankovich, S.A., Rodgers, B.N., Moore, J., Drzal, L.T., 2007. Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions. Compos Part A, 38(6): 1569–1580. | ||
|
آمار تعداد مشاهده مقاله: 1,328 تعداد دریافت فایل اصل مقاله: 674 |
||