اخبار و اعلانات

 آمار

تعداد نشریات282
تعداد نشریات سازمان80
تعداد شماره‌ها3,255
تعداد مقالات35,955
تعداد مشاهده مقاله54,825,335
تعداد دریافت فایل اصل مقاله93,839,175
خدامرادی وطن, نسرین, احمدی, حجت. (1405). مروری بر اصول هیدرولیکی آبگیری از رودخانه با تاکید بر کنترل رسوب بدون استفاده از صفحات مستغرق. سامانه مدیریت نشریات علمی, 27(102), 44-17. doi: 10.22092/idser.2026.372544.1646
نسرین خدامرادی وطن; حجت احمدی. "مروری بر اصول هیدرولیکی آبگیری از رودخانه با تاکید بر کنترل رسوب بدون استفاده از صفحات مستغرق". سامانه مدیریت نشریات علمی, 27, 102, 1405, 44-17. doi: 10.22092/idser.2026.372544.1646
خدامرادی وطن, نسرین, احمدی, حجت. (1405). 'مروری بر اصول هیدرولیکی آبگیری از رودخانه با تاکید بر کنترل رسوب بدون استفاده از صفحات مستغرق', سامانه مدیریت نشریات علمی, 27(102), pp. 44-17. doi: 10.22092/idser.2026.372544.1646
خدامرادی وطن, نسرین, احمدی, حجت. مروری بر اصول هیدرولیکی آبگیری از رودخانه با تاکید بر کنترل رسوب بدون استفاده از صفحات مستغرق. سامانه مدیریت نشریات علمی, 1405; 27(102): 44-17. doi: 10.22092/idser.2026.372544.1646

مروری بر اصول هیدرولیکی آبگیری از رودخانه با تاکید بر کنترل رسوب بدون استفاده از صفحات مستغرق

تحقیقات مهندسی سازه های آبیاری و زهکشی
دوره 27، شماره 102، فروردین 1405، صفحه 44-17    اصل مقاله (789.33 K)
نوع مقاله: مقاله مروری
شناسه دیجیتال (DOI): 10.22092/idser.2026.372544.1646
نویسندگان
نسرین خدامرادی وطن* 1؛ حجت احمدی2
1دانشجوی دکتری رشته علوم و مهندسی آب گرایش سازه‌های آبی، گروه کشاورزی،دانشگاه ارومیه، ارومیه، ایران
2استاد گروه رشته علوم و مهندسی آب گرایش سازه‌های آبی، گروه کشاورزی،دانشگاه ارومیه، ارومیه، ایران
چکیده
آبگیرهای رودخانه‌ای یکی از سازه‌های کلیدی در مدیریت منابع آب هستند. از چالش‌های اصلی در طراحی و استفاده از این سازه‌ها، رسوب‌گذاری است که می‌تواند به کاهش ظرفیت ذخیره‌سازی و کارایی آبگیرها منجر شود. زاویۀ آبگیر عاملی است مهم در تعیین الگوی جریان و توزیع رسوبات. این عامل تأثیر قابل توجهی بر فرآیند رسوب‌گذاری در رودخانه دارد. بدین منظور پژوهش حاضر به بررسی مطالعات پیشین می پردازد، مطالعاتی که  طی 81 سال در بازۀ زمانی 1944 تا 2025  در زمینۀ سازه‌های آبگیر در مجلات دارای نمایۀ علمی و پژوهشی منتشر شده‌اند و در بانک اطلاعات داخلی معتبر و خارجی دیده می­شوند. در این راستا 132 مقاله بررسی شد ، این مقالات به بخش‌های مختلفی تفکیک و در هر بخش مقالات مرتبط تفکیک و تقسیم بندی شدند و سپس وتجزیه و تحلیل گردیدند. مرور مفهومی مقالات و استفاده از دیاگرام پریسما و بررسی همه جانبه نشان داد که زاویه آبگیر از موارد مهم و اصلی برای کنترل رسوب است. نتایج این بررسی می‌تواند به مهندسان و طراحان در بهینه‌سازی طراحی آبگیرها و مدیریت مؤثر منابع آبی کمک کند.
کلیدواژه‌ها
بهینه سازی زاویه آبگیر؛ روش شناسی پریسما؛ تکنیک‌های حذف رسوب؛ صفحات مستغرق و آستانه
عنوان مقاله [English]
A Review of Hydraulic Principles of River Water Intake: Focusing on Sediment Control without Submerged Vanes
نویسندگان [English]
Nasrin Khodamoradi vatan1؛ Hojat Ahmadi2
1Ph.D. Student in Water Science and Engineering – Hydraulic Structures, Department of Agriculture, Urmia University, Urmia, Iran.
2Professor, Department of Water Science and Engineering – Hydraulic Structures, Department of Agriculture, Urmia University, Urmia, Iran
چکیده [English]
Extended Abstract
Introduction
River intakes constitute critical hydraulic infrastructure for sustainable water resource management. A primary challenge in the design and operation of these structures is sediment management, as excessive sedimentation significantly impairs storage capacity and operational efficiency. The intake angle is a pivotal geometric parameter governing flow patterns and sediment transport mechanisms, exerting a substantial influence on the sedimentation process within the river–intake system. The present study provides a systematic literature review covering an 81-year period (1944–2025). We synthesized findings from 132 peer-reviewed articles sourced from reputable domestic and international scientific databases. Following a comprehensive thematic classification, the literature was analyzed using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) framework. Conceptual synthesis of the reviewed evidence underscores that the intake angle is a fundamental design variable for effective sediment control. These findings offer practical insights for hydraulic engineers and practitioners, facilitating the optimization of intake configurations and enhancing overall water resource management strategies.
Materials and Methods
This study employs a systematic and documentary review to analyze the hydraulic and sediment-control performance of lateral intakes in open channels. Drawing upon 132 national and international publications retrieved from reputable databases between 1944 and 2025, the research synthesizes findings from both laboratory and numerical investigations. The analysis, structured under the PRISMA framework and complemented by a conceptual review approach, identifies the key hydraulic, geometric, and sedimentary parameters affecting intake efficiency. Results indicate that optimized intake angle and position, along with geometric modifications such as sloped walls, submerged vanes, and deflector structures, substantially reduce vortex formation and sediment entry. Numerical modeling using tools such as FLUENT, FLOW‑3D, and SSIIM demonstrates high agreement with experimental data, validating its use for design optimization. Moreover, hybrid and multi‑component designs integrating vanes, sills, and guide walls achieve sediment reduction rates exceeding 70%. The study concludes that sustainable and efficient water‑diversion systems require an integrated design approach balancing hydraulic performance, sediment dynamics, and site‑specific topographic conditions, supported by advanced numerical modeling and experimental validation.
 Results
The review of eleven studies published between 1944 and 2025 revealed consistent patterns in the hydraulic behavior and sediment‑control performance of lateral intakes. Analysis of laboratory and numerical investigations indicated that variations in intake angle, channel curvature, discharge ratio, and intake geometry have the most significant impact on vortex formation, flow separation, and sediment entry. Experimental results showed that reducing the intake angle generally decreases sediment intrusion, while positioning the intake along the outer bend improves flow distribution and minimizes scour depth. Numerical simulations using CFD models such as FLUENT provided strong agreement with experimental findings, confirming the critical role of geometric configuration and shear stress in controlling flow behavior. After multiple comparative evaluations, seven major parameters were identified as the dominant factors governing intake efficiency: intake angle, bend conditions, bed shear stress, relative curvature‑to‑depth ratio, geometry and dimensions of the intake, discharge ratio, and Froude number. These parameters form a unified analytical framework for optimizing intake design to achieve minimal sediment intrusion and stable hydraulic operation.
Conclusions
A comprehensive review of studies conducted between 1944 and 2025 revealed that the hydraulic performance of lateral intakes in open channels is strongly governed by geometric configuration and flow conditions. The intake angle, discharge ratio, and intake position along the channel bend are among the most influential parameters controlling flow patterns, vortex formation, and sediment entry. Findings from previous research indicate that intake angles of 45°–60° effectively minimize flow separation, while positioning the intake on the outer bend (at angles of 115°–135°) enhances flow uniformity and reduces local scour. Both numerical and physical investigations confirm that the geometry of the intake and sidewalls—particularly curved or rounded-corner designs—and regulation of hydrodynamic parameters such as the Froude number play a decisive role in sediment control. The strong agreement between laboratory observations and advanced computational models further supports the reliability of numerical approaches for optimized design.
Overall, achieving stable hydraulic performance in lateral intakes requires an integrated approach that simultaneously considers optimal intake geometry and position, improved hydraulic conditions, and the use of auxiliary structures. Despite significant progress in laboratory and numerical studies, research gaps remain—particularly in field-scale investigations, sediment characterization, and interaction analyses of combined structures under complex flow conditions. Future developments in three-dimensional numerical modeling and large-scale field experiments could substantially enhance understanding of these interactions and lead to more sustainable strategies for sediment management and intake efficiency.
 Conflict of Interest
The authors declare that they have no conflict of interest regarding the preparation and publication of the materials and findings presented in this study.
 Funding
The authors received no financial support for the research, authorship, or publication of this article.
 Data Availability Statements
The datasets generated and/or analyzed during the current study are available from the corresponding author on reasonable request.
 Authors’ Contributions
All authors contributed equally to the conceptualization of the study, preparation of the original draft, and subsequent revisions
Acknowledgement
The authors wish to express their sincere gratitude to the Editor and the two anonymous reviewers for their insightful comments and constructive feedback, which significantly improved the quality of this manuscript. We also thank the Regional Water Company of Qazvin for providing the necessary data for this research.
 
کلیدواژه‌ها [English]
Optimization of intake angle, PRISMA methodology, sediment exclusion techniques, submerged vanes, sill structure
مراجع

Abbasi, A., Ghodsian, M., Habibi, M., & Salehi Nishabouri, S. A. (2003). Experimental investigation of the dimensions of the vortex zone at the entrance of lateral intakes. Journal of Research and Construction, 62, 38–44. (in Persian)

Abbasi, A. (2003). Experimental study of sediment control in lateral intakes in straight reaches. PhD dissertation, Tarbiat Modares University. (in Persian)

Abbasi, A. A., & Maleknejad Yazdi, M. (2014). Effect of sill and submerged vanes on sediment‑laden flow entering a lateral intake. Irrigation and Water Engineering Scientific and Research Quarterly, 4(16), 104–116. (in Persian)

Amirsalari Meymani, F., Shafaei Bajestan, M., & Dorosti, M. (2017). Optimal location of a slot in a submerged triangular plate attached to the bank in a 90‑degree bend. Journal of Water and Soil Resources Conservation, 7(1), 89–97. (in Persian)

Ahmadali, J., & Khanjani, M. J. (2006). Optimization of submerged vane systems for sediment control at river intakes. Journal of Agricultural Engineering Research, 7(26). (in Persian)

Abolghasemi, M. (2013). Effect of intake angle on flow pattern and sediment transport around the intake head in a meandering river. Journal of Hydraulic Research, 8(3), 29. https://www.magiran.com/p1313859 (in Persian)

Abolghasemi, M. (2012). Effect of flow deflection on sediment entering a side intake with 90-degree diversion angle in a sinuous river. Amirkabir Journal of Civil Engineering, 44(1), 43–54. https://www.magiran.com/p1529077 (in Persian)

Attarzadeh, A., & Babakhani, A. (2022). Investigating the effect of different sediment control modes on the banks around a lateral intake entrance. Amirkabir Journal of Civil Engineering, 54(11), 1. https://www.magiran.com/p2503792 (in Persian)

Attarzadeh, A., Ghodsian, M., Ayoubzadeh, S. A., & Salehi Neyshabouri, S. A. A. (2019). Experimental comparison of different methods for sediment control and scour reduction in 90-degree lateral intakes. Modares Civil Engineering Journal, 19(4), 121–133. https://www.magiran.com/p2056912 (in Persian).

Attarzadeh, A., Ghodsian, M., Ayoubzadeh, S. A., & Salehi Nishabouri, S. A. (2015). Experimental study of the effect of sediment control structures on bed topography around lateral intakes. Proceedings of the 10th International Congress on Civil Engineering, University of Tabriz, Tabriz, Iran. (in Persian)

Ashnavar, M., & Yasi, M. (2023). Simulation of water flow with sediment transport in diversion dam intakes located at a channel bend. Journal of Water and Irrigation Management, 13(3), 611–628. https://www.magiran.com/p2631323 (in Persian)

Ashnavar, M., & Yasi, M. (2022). Investigation of differences in inflow with sediment transport to diversion dam intakes on one and both sides of a bend in a waterway. Iranian Journal of Water Engineering Research, 2(2), 37–48. https://www.magiran.com/p2645963 (in Persian)

Ahmed, K. O., Majeed, H. Q., Amini, A., & Shafaei, H. (2025). Scour prediction at culvert outlets using ansys fluent: influence of inlet blockage, flow rate, and sediment size. ISH Journal of Hydraulic Engineering, 1–17. https://doi.org/10.1080/09715010.2025.2495789

Anwar, H. O. (1955) . "Flow at low head intakes." Water Power, (Nov.), p.p.455-457.

Arksey H, O'Malley L (2005). Scoping studies: towards a methodological framework. International journal of social research methodology; 8(1): 19-32.

Anastasia, D. et al. (1986). “Flow in curved converging channel.” J. Hydr. Eng, ASCE. Vol.112, No.6, pp. 476-496.

Badri, P., Shafaei Bajestan, M., Kashefipour, S. M., & Bahrami Yarahmadi, M. (2016). Experimental investigation of sediment bed topography in a mild 90‑degree bend in the presence of triangular plates attached to the bank. Journal of Irrigation Engineering (Journal of Agricultural Science), 39(1), 45–54. (in Persian)

Barkdoll, B.D.; Ettema, R.; Odgaard A.J.1999.; “Sediment Control at Lateral Diversion: Limits and Enhancements to Vane Useˮ, Journal of Hydraulic Engineering ASCE, 125(8): 862-870,.

Barkdoll B. D. 1997. Sediment control at lateral diversions. A thesis submitted in partia fulfillment of the requirements for the Doctor of Philosophy degree in Civil and Environmental Engineering, Graduate College of The University of Lowa. UMI Number: 9731762 8-

Best J.L. and Reid I. 1984. Separation zone open-channel junctions. J. Hydraul.Eng., 110.(8):1588-1594.

Chalmers, I., Hedges, L. V., & Cooper, H. (2002). A brief history of research synthesis. Evaluation & the health professions, 25(1), 12-37.

Dehghani, A. A., Ghodsian, M., Salehi Nishabouri, S. A., & Shafieefar, M. (2006). Sediment control at a lateral intake in a 180‑degree bend using submerged vanes. Proceedings of the 7th Civil Engineering Conference, Tarbiat Modares University. (in Persian)

Davoodi, L., & Shafaei Bajestan, M. (2011). Application of submerged vanes in controlling bed‑load sediment at lateral intakes branching from trapezoidal irrigation canals. Journal of Water and Irrigation Management, 1(2), 59–71. (in Persian)

Davoudi, L., & Shafaei Bejestan, M. (2012). Application of submerged vanes in controlling bed‑load sediment at intakes branching from trapezoidal irrigation channels. Journal of Water and Irrigation Management, 1(2), 59. https://www.magiran.com/p996039 (in Persian)

Dastourani, M., Mohseni, B., Rezaghian, H., & Momeni, B. (2019). Positioning of lateral intakes to control sediment entry. Journal of Watershed Extension and Development, 7(25), 52–60. https://www.magiran.com/p2012905 (in Persian)

Derakhshan, H. (2015). Simulation of flow in a lateral intake within a rectangular channel using the FLUENT model. Water Resources and Development Journal, 3(1), 41. https://www.magiran.com/p1408899 (in Persian)

Esmaeili Varki, M., Farhodi, J., & Omid, M. H. (2010). Experimental study of diverted flow pattern structure towards a 90-degree lateral intake and its incoming sediment rate in diversion gates. Journal of Agricultural Engineering Research, 10(1), 49. https://www.magiran.com/p780354 (in Persian)

Egger, M., Davey Smith, G., & Altman, D. G. (Eds.). (2001). Systematic reviews in health care: Meta-analysis in context (2nd ed.). London: BMJ Books.

 Fazel Najafabadi. E,   &  Ayyoubzadeh S, A. . 2024. Effectiveness of Submerged Vanes in Sediment Control to the Intake Channels: A Review and Future Directions. Journal of Irrigation and Drainage Engineering. Volume 151, Issue 2. https://doi.org/10.1061/JIDEDH.IRENG-10349

Fazli, M., & Ghodsian, M. (2010). Effect of vortex strength and transverse flow strength on the scour process around groynes in channel bends. Proceedings of the 9th Iranian Hydraulic Conference, Tarbiat Modares University, Tehran. (in Persian)

Fazli, M., Ghodsian, M., & Salehi Nishabouri, S. A. (2009). Bed topography variations in a 90‑degree bend under different flow conditions. Modares Technical and Engineering Journal, (3), 123–142. (in Persian)

Gohari, S., Ayoubzadeh, S. A., Ghodsian, M., & Salehi Nishabouri, S. A. (2010). Experimental investigation of the flow pattern in a lateral intake using simultaneous submerged vanes and groynes in alluvial beds. Journal of Agricultural Engineering Research, 11(4), 1–18. (in Persian)

Grace, J. L., and Priest, M. S. (1958). "Division of flow in open channel junctions." Bulletin No. 31, Engineering Experimental Station, Alabama Polytechnic Institute

Gohari, S., & Ayoubzadeh, S. A. (2009). Experimental investigation of flow pattern and sediment control in lateral intakes using submerged vanes and spur dikes. PhD dissertation in Hydraulic Structures, Faculty of Agriculture, Tarbiat Modares University. (in Persian)

Hall, G. M. (2003). How to write a systematic review. In G. M. Hall (Ed.), How to write a paper (3rd ed., pp. 89–104). London: BMJ Books.

Hassanpour, F., Ayoubzadeh, S. A., & Ghodsian, M. (2011). Sediment‑control performance of compound submerged vanes at the entrance of a 90‑degree lateral intake. Journal of Watershed Management Research, 92, 1–12. (in Persian)

Honar, T., & Mazloom Shahraki, S. (2014). Effect of submerged vanes on the discharge capacity of lateral intakes. Water and Soil Knowledge Journal, 24(3), 205–214. (in Persian)

Honar, T., & Mazloom Shahraki, S. (2014). Effect of submerged vanes on the intake rate in lateral intakes. Soil and Plant Science Journal, 24(3), 205–214. magiran.com/p1339324 (in Persian)

Haghighi Aby, A. H., & Emamgholizadeh, S. (2015). Prediction of lateral erosion in meandering reaches of the Kashkan River. Geography and Development Quarterly, 13(40), 125–138. (in Persian)

Habibi, H., Masjedi, A., Pourmohammadi, M. H., Kamanbedast, A. A., & Bardbar, A. (2019). Experimental investigation of the effect of submerged vane geometry on sediment‑laden flow entering a lateral intake in a river bend. Journal of Irrigation and Water Engineering, 42(2), 119–133. https://www.magiran.com/p2000134 (in Persian)

Hager, W. H.; (1987), “Discussion of ‘Dividing flow in open channels’ by Ramamurthy, A. S.

Ho, J.; Janson, A.; With, S.; (2004) 3-D Numerical Simulation study of Permanent Sediment Control Submerged Vanes, National Science Foundation, Research Education for Undergraduation,.

Hashid, M.; Hussain, A.; Ahmad, Z. 2015; Discharge characteristics of lateral circular intakes in open channel flow. Flow Measurement and Instrumentation, 46: 87- 92.

Ingle, R. N., and Mahankal, A. M. (1990). "Discussion of ‘Division of Flow in Short Open Channel Branches’. by A. S. Ramamurthy. and M. G. Satish." Journal of Hydraulic Engineering, ASCE, Vol. 116, No. 2, P.P.289-291

Indlekoper, H., Robinson, S., and Rouve. (1975). “On the transport of bed load in a channel branches and the regulation by inducing artificial secondary flow.” International Congress of Irrigation and Drainage, 9th Congress Moscow.

Izadpanah, Z., & Salehi Nishabouri, S. A. (2003). Sediment transport investigation in lateral intakes located in river bends. Journal of Agricultural Science, 26(2), 15–23. (in Persian)

Jalili, H. R., Hosseinzadeh Dalir, A., & Farsadizadeh, D. (2011). Effect of intake entrance geometry on flow pattern and sediment deposition in a vertical lateral intake. Journal of Water and Soil, 25(6), 1321. https://www.magiran.com/p995983 (in Persian)

Jalili, H., Hosseinzadeh Dalir, A., & Farsadi Zadeh, D. (2011). Effect of intake opening shape on flow pattern and sediment deposition in a vertical side intake. Journal of Water and Soil, 25(6), 1321. (in Persian)

Jalili, H., Hosseinzadeh Dalir, A., & Farsadi Zadeh, D. (2011). Effect of intake‑opening geometry on the amount and pattern of sediment deposition in a lateral intake. Iranian Journal of Water Research, 5(9), 1–10. (in Persian)

Jalili, H., Hosseinzadeh Dalir, A., & Farsadi Zadeh, D. (2012). Effect of intake-opening geometry on the amount and pattern of sediment deposition in a lateral intake. Iranian Journal of Water Research, 5(9), 1. magiran.com/p1022672 (in Persian).

Jafari Mianaei, S., & Ayoubzadeh, S. A. (2013). Experimental study of the effect of main‑channel wall slope on sediment inflow to a lateral intake with and without submerged vanes. Iranian Journal of Irrigation and Drainage, 7(4), 521–534. (in Persian)

Keshavarzi, A. R., & Kazemzadeh Parsi, M. J. (2006). Experimental study of turbulent flow structure and separation zone and comparison with turbulence models in a 41‑degree blocked‑end intake. Agricultural and Natural Resources Sciences and Technologies, 10(1). (in Persian)

Karami Moghaddam, M., Shafaei Bajestan, M., & Sadeghi, H. (2011). Experimental and numerical study of flow pattern in a 30-degree lateral intake from a trapezoidal channel. Journal of Water and Soil Sciences (Agricultural Sciences and Natural Resources), 15(3), 35. magiran.com/p950561 (in Persian)

Karami Moghaddam, M., & Seyedian, S. M. (2016). Numerical simulation of flow deviation from main channel intake with vertical and inclined walls using Fluent. Soil and Plant Science Journal, 26(2), 1–12. magiran.com/p1586591 (in Persian)

Karami‑Moghadam, M., Keshavarzi, A., & Sabzevari, T. (2018). Effect of diverted discharge, intake entrance shape, bed topography, and bed roughness on flow separation dimensions and shear stress in a lateral intake. Journal of Irrigation and Drainage Structures Engineering Research, 19(73), 113–126. https://www.magiran.com/p1943778 (in Persian)

Karami Moghadam, M., Sabzevari, T., & Nourzadeh Haddad, M. (2017). Effect of intake entrance geometry on energy/momentum coefficients and flow separation zone dimensions. Water and Soil Journal, 31(5), 1278–1289. https://www.magiran.com/p1781570 (in Persian)

Kasthuri, B.; and Pundarikanthan, N. V. 1987; “Discussion on separation zone at open channel junctions”, Journal of Hydraulic Engineering, 113 (4): 543- 548.

Keshavarzi, A., & Habibi, L. (2005). Optimizing water intake angle by flow separation analysis. Irrigation and drainage, 54(5), 543-552.

Karami Moghaddam, M., Bajestan, M. S., & Sedghi, H. (2010). Sediment Entry Investigation at the 30 Degree Water Intake Installed at a Trapezoidal Channel.World Applied Sciences Journal, 11(1), 82-88

Law, S. W., & Reynolds, A. J. (1966). "Dividing flow in an open channel." Journal Hydraulic Division., ASCE, Vol. 92, No. 2, P.P. 207-231.

Lama, S. K., Kuroki, M., Hasegawa, K. (2002). Study of flow bifurcation at the 30 open channel junction when the width ratio of branch channel to main channel is large. Annual Journal of Hydraulic Engineering, JSCE.

Michell, F., Ettema, R. and Muste, M. (2006). “Case study: sediment control at water intake for large thermal-power station on a small river.” J. Hydraul. Eng., ASCE 132 (5), 440–449.

Mousavi, S. K., & Ghodsian, M. (2010). Experimental investigation of the effect of relative channel curvature on bed scour in a 90‑degree bend. Modares Civil Engineering Journal, 10(2), 135–144. (in Persian).

 Montasseri, H., & Jamalabadi, Z. (2023). Determination of position and deviation angle of side intakes in U‑shaped curved channels. Modares Civil Engineering Journal, 23(1), 1–20. (in Persian)

Montasseri, H., Ghodsian, M., & Dehghani, A. A. (2009). Experimental study of the flow field around submerged vanes placed upstream of a lateral intake in a U‑shaped channel. Journal of Agricultural Sciences and Natural Resources, 16(2). (in Persian)

Mousavi, S. K., & Ghodsian, M. (2010). Experimental investigation of the effect of relative channel curvature on bed scour in a 90‑degree bend. Modares Civil Engineering Journal, 10(144), Summer, 135–144. (in Persian)

Mehtabi, G., & Hosseinzadeh Dalir, A. (2012). Experimental study of the effect of a flow‑deflecting wall with a sill on controlling sediment inflow to a lateral intake. Journal of Irrigation Science and Engineering, 35(3), 69–81. (in Persian)

Moradinejad, A., Haghighi Aby, A. H., Sanaei, M., & Younesi, H. (2017). Experimental investigation of the effects of a dividing wall and spur dike on controlling sediment entry into a lateral intake in a straight channel. PhD dissertation, Faculty of Agriculture, University of Lorestan, 206 p. (in Persian)

Montasseri, H., Ghodsian, M., & Salehi Nishabouri, S. A. (2020). Experimental study on design parameters of submerged vanes for sediment control at lateral intakes in a 180-degree curved channel. Modares Civil Engineering Journal, 20(1), 14. magiran.com/p2155747 (in Persian)

Maroufinia, E., Esna Ashari, A., Hasanzadeh, Y., Khoshtinat, S., & Aminnejad, B. (2016). Simulation of the effect of submerged vanes and spur dikes on sediment control at a lateral intake using SSIIM2 software. Journal of Irrigation and Water Engineering, 39(4), 169–180. https://www.magiran.com/p1629762 (in Persian)

Moradinejad, A., Haghi Abi, A. H., Sanaei, M., & Younesi, H. (2018). Experimental study of the effect of separator wall angle on sediment control at intake structures. Journal of Watershed Engineering and Management, 10(1), 28–42. https://www.magiran.com/p1804307 (in Persian)

Montaseri, H., Ghodsian, M., & Salehi Neyshabouri, S. A. A. (2018). Experimental study of sediment transport and mechanism of sediment entrance into a lateral intake in a 180-degree curved channel using the sediment injection method on a rigid bed. Modares Civil Engineering Journal, 18(5), 203–215. https://www.magiran.com/p1947413 (in Persian)

Masjedi, A., & Halvaei Fard, M. (2016). Investigation of the effect of submerged vane angle on sediment control at a lateral intake in a 180-degree river bend. Journal of Water and Soil (Agricultural Sciences and Natural Resources), 20(4), 29–38. https://www.magiran.com/p1642967 (in Persian)

Montaseri, H. and Tavakoli, K. and Evangelista, S. and Omidvar, P. 2020. {Sediment transport and bed evolution in a 180∘ curved channel with lateral intake: Numerical simulations using Eulerian and Discrete Phase models. International Journal of Modern Physics C. volume 31(08). 2050113. doi = {10.1142/S0129183120501132},

Nazari, S., & Shafaei Bajestan, M. (2011). Effect of the intake deflection angle on the ratio of discharge and sediment inflow to the intake in a converging 90-degree bend. Journal of Watershed Management Research, 23(87), 78. (in Persian)

Nazari, S., & Shafaei Bajestan, M. (2010). Effect of intake deflection angle on discharge and sediment‑entry ratios in a converging 90‑degree bend. Journal of Watershed Management Research, 23(2), 72–81. (in Persian)

Nazari, S., & Shafaei Bajestan, M. (1998). Experimental investigation of the effects of diversion angle and intake sill height on sediment entry in river bends. Master’s thesis in Irrigation Engineering, Faculty of Agriculture, Shahid Chamran University of Ahvaz. (in Persian)

Nazari, N., Salehi Nishabouri, S. A., & Amiri Takeldani, E. (2018). Three-dimensional numerical simulation of flow pattern in intake from a straight trapezoidal channel. Iranian Journal of Water and Soil Research, 49(6), 1289–1298. magiran.com/p1933840 (in Persian)

Nazari, S., & Shafaei Bejestan, M. (2011). Effect of intake deviation angle on discharge and sediment diversion ratios in a converging 90-degree bend. Watershed Management Research Journal, 23(87), 78. https://www.magiran.com/p909433 (in Persian)

Neary, V.S. (1995). “Numerical Model of Diversion flows.” Civil and Environmental Engineering, University of Iowa, Iowa city, Iowa.

Neary, V. S., and Sotiropoulos, F. (1996). ‘‘Numerical investigation of laminar flows through90-degree diversions of rectangular cross-section.’’ Comp. and Fluids, 25(2), 95–118.

Neary, V., Sotiropoulos, F., and Odgaard, A.J. (1999). “Three-dimensional numerical model of lateral-intake in flows.” J. Hydr. Eng, ASCE. Vol.125, No.2, pp.126-140.

Neary, V., Barkdoll, B., and Odgaard, A.J. (1994). “Sand Bar Formation in Side-Diversion Channels.” J. Hydr. Eng, ASCE, pp. 1171-1175.

Nakato, T.; Kennedy, J. F.; Bauerly, D. 1990; “Pump-station intake shoaling control with submerged vanes”, Journal of Hydraulic Engineering ASCE, 116(1): 119-128.

Neary V.S. and Odgaard A.J. 1993 Three dimensional flow structure at open channel diversions. J. Hydraul. Eng., 119(11):1223-1230.

Nakato, T. and Ogden, F. L. (1998). “Sediment control at water intakes along sand-bed rivers.” J. Hydraul. Eng., ASCE 124 (6), 589–596.

Okoli C, Schabram K. (2010). A guide to conducting a systematic literature review of information systems research. Sprouts: Working Papers on Information Systems 2010; 10 (26).

Oliveira, L. C. S., & Lima Neto, I. E. (2024). The impacts of the water intake operation on the hydraulic transients, sediment resuspension and water quality of a large reservoir in Brazil: A case study. 10th International Symposium on Hydraulic Structures. https://doi.org/10.3929/ethz-b-000675990

Omid Beigi, M. A., Ayoubzadeh, S. A., & Safarzadeh, A. (2011). Experimental and numerical study of three-dimensional flow structure in a lateral water intake from a river. Modares Civil Engineering Journal, 12(1), 1. https://www.magiran.com/p960564 (in Persian)

Odgaard, A. J., Wang, Y. (1991a). “Sediment management with submerged vanes.” I: Theory, J. Hydr. Engrg., ASCE, Vol. 117, No. 3, P.P. 267-283.

Ouyang, H. T. (2009). “Investigation on the Dimensions and Shape of a Submerged Vane for Sediment Management in Alluvial Channels.” J. Hydraul. Eng., 135(3), 209–217.

Odgaard A. J.; Wang, Y. 1991. “Sediment management with submerged vanes”, I: Theory. Journal of Hydraulic Engineering, 117(3): 367-283,.

Phillips, B., Ball, C., Sackett, D., Badenoch, D., Straus, S., Haynes, B., & Dawes, M. (2009). Oxford Centre for Evidence-Based Medicine – Levels of Evidence (March 2009). Oxford: Centre for Evidence-Based Medicine. Retrieved from https://www.cebm.ox.ac.uk/resources/levels-of-evidence

Pirestani, M. R., Majdzadeh Tabatabaei, S. M. R., & Barkhordari, N. (2008). Flow analysis over a side intake in a curved channel using a physical model. Journal of Water and Soil, 22(2), 210–219. (in Persian)

Pirestani, M. (2002). Investigation of flow pattern and scour at the entrance of intakes in curved channels. PhD dissertation, Islamic Azad University, Science and Research Branch. (in Persian)

Pirestani, M. R. (2004). Investigation of flow pattern and scour at the inlet of curved channel intakes. PhD dissertation, Islamic Azad University, Science and Research Branch. (in Persian)

Pirestani, M. R., Salehi Nishabouri, S. A., & Majdzadeh Tabatabaei, M. R. (2006). Experimental investigation of flow deviation in lateral intakes in curved channels. Iranian Journal of Water Resources Research, 2(2), 78. magiran.com/p897888 (in Persian)

Razaghi, A., Ahmadi, H., Haghdoust, N., & Hessari, B. (2019). Assessment of river environmental flow using eco-hydrological methods (Case study: Mahabadchay river). Journal of Water and Soil Conservation, 26(4), 1-23. https://doi.org/10.22069/jwsc.2019.14563.2939. (in Persian)

Ramamurthy, A. S., and Satish, M. G. (1988). "Division of Flow in Short Open Channel Branches." Journal of Hydraulic Engineering, ASCE, Vol. 114, No. 4, P.P. 428-438.

Ramamurthy A.S. Junying Q.U. and Diep V.O. (2007). Numerical and Experimental Study of Dividing Open Channel Flows. J. Hydraul.Eng.,133(10):1375-1145.

Keshavarzi, A., & Habibi, L. (2005). Optimizing water intake angle by flow separation analysis.

Irrigation and drainage, 54(5), 543-552.

Rana A. Al-Zubaidy, Ali N. Hilo. 2022. Numerical investigation of flow behavior at the lateral intake using Computational Fluid Dynamics (CFD)., Materials Today: Proceedings, Volume 56, Part 4 Pages 1914-1926, ISSN22147853,https://doi.org/10.1016/j.matpr.2021.11.172.https://www.sciencedirect.com/science/article/pii/S2214785321071807.

Rostamabadi, M., Salehi Nishabouri, S. A., & Montasseri, H. (2009). Numerical simulation of the effect of submerged vanes on secondary flow in a 180‑degree bend upstream of a lateral intake. Journal of Water and Soil Conservation Research, 16(3), 17–39. (in Persian)

Rahmanian, M. (2010). Hydrodynamic investigation of the effect of submerged plate arrangement in intake locations. Master’s thesis, Department of Civil Engineering, Shahid Bahonar University of Kerman, 147 p. (in Persian)

Rostamabadi, M., Salehi Neyshabouri, S. A. A., & Montaseri, H. (2009). Numerical simulation of flow pattern around submerged vanes in front of a lateral intake in a 180‑degree bend to determine the optimal vane angle and height. Journal of Hydraulic Research, 4(3), 37. https://www.magiran.com/p922981 (in Persian)

Rahmani Firouzjai, M., Behnam Talab, E., Salehi Neyshabouri, S. A. A., & Mohajeri, S. H. (2021). Hydraulic evaluation of side intake by pipe from an open channel using a numerical model. Modarres Civil Engineering Journal, 21(3), 45–60. https://www.magiran.com/p2277930 (in Persian)

Rostamabadi, M. (2021). Numerical study on the effects of intake geometric parameters and submerged vane arrangement on the sediment diversion coefficient of lateral intakes. Journal of Hydraulic Research, 15(4), 95–111. https://www.magiran.com/p2249491 (in Persian)

Raudkivi A.J. 1993. Sedimentation: Exclusion and removal of sediment from diverted water. IAHR Hydraulic Structures Design Manuals,.

Ramamurthy, A. S., Junying, Q., and Diep, V. (2007). “Numerical and experimental study of dividing open-channel flows.” J. Hydraul. Eng., 133(10), 1135–1144

 Soleymani Esboei, H. R. (1996). Effect of submerged vane arrangement in river cross‑sections on bed morphology changes. Master’s thesis, Faculty of Agriculture, University of Tehran, 175 p. (in Persian)

Sajedi Sabegh, M., & Habibi, M. (2005). Experimental investigation of the application of submerged vanes and groynes to improve intake efficiency. Proceedings of the 5th Iranian Hydraulic Conference, Shahid Bahonar University of Kerman. (in Persian)

Safarzadeh Gandeshemin, A. (2009). Turbulent flow structure and qualitative investigation of sediment‑entry mechanisms into a lateral intake located in a river bend using a three‑dimensional numerical model. Journal of Hydraulics, 4(4), 13–31. (in Persian)

Safarzadeh Gandeshmin, A. (2009). Study of turbulent flow structure and qualitative investigation of sediment entry mechanism into a lateral intake located in a river bend using a three-dimensional numerical model. Journal of Hydraulic Research (Iranian Hydraulic Journal), 4(4), 13. https://www.magiran.com/p923679 (in Persian)

Safarzadeh, A. (2002). Numerical simulation of the flow pattern in a 385‑degree lateral intake bend. Master’s thesis, Tarbiat Modares University. (in Persian)

Safarzadeh, A. (2004). Numerical simulation of the flow pattern in a 180‑degree lateral intake bend. Master’s thesis, Tarbiat Modares University. (in Persian)

Shayanmehr, M., Hemmati, M., Ahmadi, H., Mehrdar, L., & Seyedzadeh, A. (2026). Optimizing lateral intakes in river bends near broad-crested weirs: a hydraulic perspective. Journal of Hydraulic Research. https://doi.org/10.1080/00221686.2026.2662307.

Seidian, S. M., Shafaei Bajestan, M., & Farasti, M. (2013). Investigation of flow‑pattern changes in a lateral intake due to inclination of the main‑channel wall. Journal of Irrigation Science and Engineering, 36(2), 1–12. (in Persian)

Seidian, S. M., Shafaei Bejestan, M., & Farasti, M. (2013). Investigation of flow pattern variation in a lateral intake caused by slanting the main channel wall. Journal of Irrigation Science and Engineering, 36(2), 1–12. https://www.magiran.com/p1537939 (in Persian)

Seidian, S. M., & Shafaei Bejestan, M. (2010). Comparison of suspended sediment entering a side intake with changes in the main channel wall angle from vertical to 45 degrees. Journal of Water and Soil (Agricultural Sciences and Engineering), 24(5), 985. https://www.magiran.com/p809526 (in Persian)

Shamloo, H., & Pirzadeh, B. (2010). Investigation of the effects of geometric and hydraulic parameters on the dimensions of the flow separation zone in lateral intakes using Fluent software. Journal of Civil Engineering Infrastructures, 44(4), 487. magiran.com/p823521 (in Persian)

Sedighi Hersini, H., & Ghabadian, R. (2024). Hydraulic investigation of flow in 180-degree bends from sharp to mild with lateral intake using SRH-2D model. Journal of Advanced Technologies in Water Productivity, 4(3), 99–117. magiran.com/p2773813 (in Persian)

Shariati, H., Khodashenas, S. R., & Esmaeili, K. (2018). Effect of intake particle dimensions and size on discharge coefficient of porous bed intakes using a physical model. Iranian Journal of Irrigation and Drainage Engineering, 41(2), 107–117. https://www.magiran.com/p1846533 (in Persian)

Shamloo, H., & Pirzadeh, B. (2007). Numerical investigation of velocity field in dividing open-channel flow. In Proceedings of the 12th WSEAS International Conference on APPLIED MATHEMATICS”, Cairo, Egypt, Desember29-31 (pp. 194-198).

Tavakoli, M., Dehghani, M., et al., (2019). Numerical investigation of the effect of side intake angle on the amount of incoming sediment in diversion channels. Iranian Journal of Water Resources Research, 15(2), 45–58. (in Persian)

Tran, D. M.; Carballada. L. B. 1992.” Journal of Hydraulic Division, ASCE, 118(4): 634–637.

Taylor, E. H. (1944). "Flow characteristics at rectangular open-channel junctions." Trans., ASCE, Vol. 109, P.P. 893-912.

Varma, C. V. J.; Sexena, K. R.; Rao, M. K. 1989. River behavior management and training, Central Board of Irrigation and Power Publication, New Delhi.

Vasquez, J. A. (2005). Twodimensional numerical simulation of flow diversions. In 17th Canadian Hydrotechnical Conference: Hydrotechnical Engineering: Cornerstone of A Sustainable Environment, , August, Edmonton, Alberta.

Varki,  M. ,Farhoudi, J., Omid, M. H. (2008). Flow investigation in a vertical right‑angled side intake using a physical model. Journal of Irrigation and Drainage Structures Engineering Research, 10(1), 1–20. (in Persian)

Vanoni V. A. (1977). Sedimentation Engineering. ASCE, New York.

Wang, Y.; Odgaard, J.; Melville, B. W.; Jain, S. C.)1996.(“Sediment control at water intakes”, Journal of hydraulic engineering ASCE,122(6): 353-356,.

  Xu, C., Tian, J., Wang, G., Lian, H., Wang, R., & Hu, X. (2024). Numerical Analysis of Water–Sediment Flow Fields within the Intake Structure of Pumping Station under Different Hydraulic Conditions. Water, 16(5), 779. https://doi.org/10.3390/w16050779

Younesi, H. (2002). Investigation of the effect of longitudinal arrangement of submerged vanes on riverbed morphology changes near gravity intakes. Master’s thesis, Faculty of Agriculture, University of Tehran. (in Persian)

Yasi, M., & Farhadi Bansuleh, A. (2019). Investigation of flow uniformity in side intakes of broad-crested overflow in a channel bend. Iranian Journal of Irrigation and Drainage, 13(5), 1294–1306. magiran.com/p2077849 (in Persian)

  Zhao, W., Zhang, J., He, W. (2022) . Effects of Diversion Wall on the Hydrodynamics and Withdrawal Sediment of A Lateral Intake. Water Resour Manage 36, 1057–1073. https://doi.org/10.1007/s11269-022-03073-9.

آمار
تعداد مشاهده مقاله: 102
تعداد دریافت فایل اصل مقاله: 78


counter
سامانه مدیریت نشریات علمی. طراحی و پیاده سازی از سیناوب