| تعداد نشریات | 282 |
| تعداد نشریات سازمان | 80 |
| تعداد شماره‌ها | 3,270 |
| تعداد مقالات | 36,114 |
| تعداد مشاهده مقاله | 55,535,564 |
| تعداد دریافت فایل اصل مقاله | 94,413,063 |
امکان‌سنجی کاربرد نانوژنراتورهای پیزوالکتریک برای تامین انرژی پهپادها با استفاده از ارتعاشات | ||
| تحقیقات سامانه‌ها و مکانیزاسیون کشاورزی | ||
| دوره 23، شماره 82، شهریور 1401، صفحه 1-18 اصل مقاله (1.78 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22092/amsr.2022.358840.1419 | ||
| نویسندگان | ||
| نصراله آستان1؛ داود محمدزمانی* 2؛ محمد غلامی پرشکوهی3؛ ابراهیم ابراهیمی4 | ||
| 1دانشجوی دکتری گروه مکانیک بیوسیستم، واحد تاکستان، دانشگاه آزاد اسلامی، تاکستان، ایران | ||
| 2استادیار گروه مکانیک بیوسیستم، واحد تاکستان، دانشگاه آزاد اسلامی، تاکستان، ایران | ||
| 3دانشیار گروه مکانیک بیوسیستم، واحد تاکستان، دانشگاه آزاد اسلامی، تاکستان، ایران | ||
| 4استادیار گروه مکانیک بیوسیستم، واحد کرمانشاه، دانشگاه آزاد اسلامی، کرمانشاه، ایران | ||
| چکیده | ||
| کاربرد انرژی‌های تجدیدپذیر در تأمین نیازهای حال و آینده بسیار حائز اهمیت است. ارتعاشات منبع خوبی برای تامین انرژی به ویزه از طریق نانوژنراتورهای پیزوالکتریک است. برای تامین بخشی از انرژی الکتریکی مورد نیاز پهپادها می‌توان از قابلیت مواد پیزوالکتریک سبک، نرم و قابل انعطاف از جمله PVDF بهره گرفت. این پژوهش به منظور بررسی امکان کاربرد نانو الیاف پلیمری پیزوالکتریک PVDF/ Zno-RGO در تامین انرژی مورد نیاز اجزای مختلف پهپاد انجام شد. در این مطالعه ابتدا از طریق فرآیند الکتروریسی نسبت به ساخت نانوالیاف پلیمری اقدام و سپس نانوژنراتور پیزوالکتریک ساخته شد. در نهایت مقدار انرژی الکتریکی تولیدی و قابلیت استفاده از آن در پهپادهای چند محور مورد ارزیابی قرار گرفت. به منظور نصب نانوژنراتور پیزوالکتریک بر روی بازوی یک پهپاد چند محور، طرحی ارائه شد. بیشترین ولتاژ تولیدی در یکی از نمونه نانوژنراتورهای مورد بررسی، 560 میلی ولت و در نمونه بزرگتر 1870 میلی ولت در شرایط آزمایشگاهی و در بسامد 23 هرتز به مدت 5 دقیقه بود. نتایج به دست آمده از این پژوهش نشان داد با کاربرد نانوژنراتورهای پیزوالکتریک امکان تامین بخشی از انرژی الکتریکی مورد استفاده پهپادها وجود داشته و می‌توان آن را ارتقا داد. | ||
| کلیدواژه‌ها | ||
| انرژی‌های تجدیدپذیر؛ نانوالیاف PVDF/ Zno-RGO؛ ارتعاشات؛ الکتروریسی | ||
| عنوان مقاله [English] | ||
| Feasibility study of using piezoelectric nanogenerators to power UAVs using vibrations | ||
| نویسندگان [English] | ||
| Nasrolah Astan1؛ davood mohamadzamani2؛ mohamad ghoamiparshokuhi3؛ Ebrahim Ebrahimi4 | ||
| 1Takestan, Shami Shop Three-Way, Islamic Azad University, Department of Biosystems Mechanical Engineering | ||
| 2Department of Farm Machinery, Takestan Branch, Islamic Azad University, Takestan, Iran | ||
| 3Department of Biosystems Engineering, Takestan Branch, Islamic Azad University, Takestan, Iran | ||
| 4Dept of Mechanics, Islamic Azad UNiversity, Kermanshah Branch, Kermanshah, Iran | ||
| چکیده [English] | ||
| The use of renewable energy is very important in meeting current and future needs. Vibrations are a good source of energy, especially through piezoelectric nanogenerators. Light, soft and flexible piezoelectric materials such as PVDF can be used to supply part of the electrical energy required by drones. This study was conducted to investigate the possibility of using PVDF / Zno-RGO piezoelectric polymer polymer nanofibers in supplying the required energy of different UAV components. In this study, first, polymer nanofibers were constructed through electrospinning process and then piezoelectric nanogenerator was constructed. Finally, the amount of electrical energy produced and its usability in multi-axis drones were evaluated. A plan was proposed to install a piezoelectric nanogenerator on the arm of a multi-axis drone. The highest output voltage in one of the samples of nanogenerators was 560 mV and in the larger sample was 1870 mV in laboratory conditions and at a frequency of 23 Hz for 5 minutes. The results of this study showed that by using piezoelectric nanogenerators, it is possible to supply part of the electrical energy used by drones and it can be upgraded. | ||
| کلیدواژه‌ها [English] | ||
| Renewable energies, PVDF / Zno-RGO nanofibers, Vibrations, Electrospinning, UAV | ||
| مراجع | ||
|
Anton, S. R. (2011). Multifunctional piezoelectric energy harvesting concepts (Ph. D. Thesis), Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
Anton. S. R., Erturk. A., & Inman. D. J. (2012). Multifunctional unmanned aerial vehicle wing spar for low-power generation & storage. Journal of Aircraft, 49(1), 1-10.
Ashkaran, A., & Amini, M. (2018). Synthesis and Characterization of Graphene and Graphene Oxide Nano-sheets. Proceedings of the 13th Iranian Physical Society Dense Matter Conference. Feb. 1-2, Tehran, Iran. (in Persian)
Asgharzadeh, M., Jahani, K., Kianpour, A., & Sadeghi, M. (2015). Investigation of energy absorption from trapezoidal beam vibrations with a piezoelectric layer using the distributed parameters method. Modares Mechanical Engineering, 14(15), 96-102.
Bhavanasi.V., Kumar, V., Parida, K., Wang, J., & Lee, P. (2016). Enhanced piezoelectric energy harvesting performance of flexible PVDF-TrFE bilayer films with graphene oxide. ACS Applied Materials & Interfaces, 8, 521-529.
Erturk, A., Renno, J. M., & Inman, D. J. (2009). Modeling of piezoelectric energy harvesting from an L-shaped beam-mass structure with an application to UAVs. Journal of Intelligent Material Systems & Structures, 20(5), 529-544.
Fang, J., Wang, X., & Tong, L. (2011). Electrical power generator from randomly oriented electrospun (polyvinylidene fluoride) nanofibre membranes. Journal of Materials Chemistry, 21, 11088-11091. doi: 10.1039/c1jm11445j.
Garcia, C., Trendafilova, I., de Villoria, R. G., & del Rio, J. S. (2018). Self-powered pressure sensor based on the triboelectric effect and its analysis using dynamic mechanical analysis. Nano Energy, 50, 401- 409.
Ghahari, M., Hassanzadeh, M., & Bidaki, S. M. (2021). Synthesis of graphene-zinc oxide nanocomposites to improve the beta phase in electrospun polyvinylidene fluoride nanofibers. Proceedings of the 12th National Conference on Textile Engineering. June 9, Faculty of Textile Engineering, Yazd University. (in Persian)
Hajar, Z., Sultan Ali, S., Tayyabi, Sh., & Masoumi, M. (2018). Investigation of synthesized grapheme oxide with hummers method and its application as Hydrodesulphurization reaction catalyst support. Journal of Applied Researches in Chemistry (JARC), 12(3), 71-78. (in Persian)
Hassan Koko, H. A. (2019). Multifunctional Piezoelectric System for a Mini UAV (M. Sc. Thesis), Mechatronics Engineering, Sudan University of Science and Technology Postgraduate Collage.
Hosseini, S. M. (2017). Preparation and characterization of piezoelectric nanocomposite of polyvinylidene fluoride nanoclay/carbon nanotube by electrospinning method (Ph. D. Thesis), Iran Polymer and Petrochemical Research Institute, Process Research Institute - Plastics Group. (in Persian)
Jaleh. B., & Jabbari. A. (2014). Evaluation of reduced graphene oxide/ZnO effect on properties of PVDF nanocomposite films. Applied Surface Science, 320, 339-347.
Keshavarz Jaokar, R., Mohammad Khanlu, H., & Dehghani, R. (2019). Vibration analysis of energy harvesting models due to aeroelastic behavior of aircraft wings. Proceedings of the 8th International Conference on Acoustics and Vibrations. Dec. 4-5, Shahid Beheshti University, Iran. (in Persian)
Koc, M., Paral, M., & San, O. (2020). Fabrication & vibrational energy harvesting characterization of flexible piezoelectric nanogenerator (PEN) based on PVDF/PZT. Polymer Testing, 90, 106695. doi:10.1016/j.polymertesting.2020.106695.
Kopsaftopoulos, F., Nardari, R., Hung Li, Y., Wang, P., Ye., B., & Chang, F. (2015). Experimental identification of structural dynamics & aeroelastic properties of a self-sensing smart composite wing. Proceedings of the 10th International Workshop on Structural Health Monitoring (IWSHM). Sep. 1-3. Stanford, CA, USA. doi:10.12783/SHM2015/163.
Koszewnik, A., & Oldziej, D. (2019). Performance assessment of an energy harvesting system located on a copter. The European Physical Journal Special Topics, 228 (7), 1677-1692. doi:10.1140/epjst/e2019-800128-3.
Lu, L., Jiang, C., Hu, G., Liu, J., & Yang, B. (2021). Flexible noncontact sensing for human¨Cmachine interaction. Advanced Materials, 33(16), 2100218.
Lung-Jieh, Y., Cheng-Kuei, H., Chao-Kang, F., Shih, H. M., Feng, G. H., & Gao, M. W. (2007). Smart flapping wings with a PVDF sensor to modify aerodynamic performance of a micro UAV. Transducers- Proceedings of the International Solid-State Sensors, Actuators and Microsystems Conference. June 10-14. Lyon, France. doi:10.1109/SENSOR.2007.4300480.
Magoteaux, K., Sanders, B., & Sodano, H. A. (2008). Investigation of an energy harvesting small unmanned air vehicle, Proceedings of the SPIE - The International Society for Optical Engineering. No. 6928, Article ID: 692823.
Mahdavi, A., Yousefzadeh, M., & Lati, M. (2016). Investigation of piezoelectric performance of nanofiber and film pressure sensors of metal nanocomposites made of poly Vinylden fluoride. Fourth Specialized Conference on Nanotechnology in Electricity and Energy Industry, March 12, Tehran, Iran. (in Persian)
Mahmoodi, M., Patriot, F., Riahi Chaleshtari, H., & Mehvari. R (2016). Comparison of car engine speed sensor with PVDF sensor in XU7 engine and vibration energy perception. Journal of Engine Research, 44, 15-1.
Maftuni, N., & Kamali, Sh. (2018). Piezoelectric phenomenon, energy harvesting and introduction of the relevant module in Comsol Multiphysics software. Mechanical Engineering, 26(115), 73-78.
Murillo, N., Maudes, J., Perez-Marquez, A., Ortiz, J., & Aranguren, G. (2016). Optimization of energy harvesting concepts from vibration by piezoelectric actuator design. Proceedings of the 8th European Workshop On Structural Health Monitoring (EWSHM), July 5-8. Bilbao, Spain.
Nyamayoka, L. T., Adewumi, G. A., & Inambao, F. L. (2017). Design of a prototype generator based on piezoelectric power generation for vibration energy harvesting. Journal of Energy in Southern Africa, 28(4), 32-40. doi: http://dx.doi.org/10.17159/2413-3051/2017/v28i4a2054.
Parangusan, H., Ponnamma, D., & Al-Maadeed, M. A. A. (2017). Stretchable electrospun PVDFHFP/Co-ZnO nanofbers as piezoelectric nanogenerators. Scientific Reports, 8, 754. doi:10.1038/s41598-017-19082-3. 1-11.
Redde, G., Kulkarni, P., Patil, P., Khedkar, D., & Chopade, P. J. (2018). Vibration analysis on farm & propeller of drone. International Journal of Advance Research in Science & & Engineering, 7(5), 23-32.
Sabry, R. S., & Hussein, A. M. (2019). PVDF: ZnO/BaTiO3 as high out-put piezoelectric nanogenerator. Polymer Testing Journal, 20, doi:10.3390/s20185214.
Salek Soltani, K., & Salek Soltani, S. (2013). Electricity generation from environmental energy by nanogenerators. Nanotechnology Monthly, 12(5), 28-33.
Sawalakhe, P. V., & Shaaikh, J. A. (2020). Simulation & analysis of a quadrotor UAV while Landing, International Journal of Recent Technology & Engineering (IJRTE), 8(6), 1-9.
Sharaf Khani, S., & Kaukabi, M. (2018). Electrospun ZnO / PVDF nanofibers in the role of piezoelectric sensor. Nanoscale, 4(4), 357-363.
Shi, K., Sun, B., Huang, X., & Jiang, P. (2018). Synergistic effect of graphene nanosheet and BaTiO3 nanoparticles on performance enhancement of electrospun PVDF nanofiber mat for flexible piezoelectric nanogenerators. Nano Energy, 52, 153-162.
Singh, U. K., & Middleton, R. H. (2007). Piezoelectric power scavenging of mechanical vibration energy, Australian Mining Technology Conference, Oct. 2-4. Swan Valley, WA.
Singh, A., & Sharma, V. (2013). Design analysis & constructiuon of energy harvesting. Aviation, 17(4),145-149. doi:10.3846/16487788.2013.861230.
Tao, K., Chen, Z., Yi, H., Zhang, R., Shen, Q., Wu, J., Tang, L., Fan, K., Fu, Y., Miao, J., & Yuan, W. (2021). Hierarchical honeycomb‑structured electret/triboelectric nanogenerator for biomechanical & morphing wing energy harvesting. Nano-Micro Letters, 13(1), 2150-5551.
Thakur, P., Kool, A., Hoque, N. A., Bagchi, B., Khatun, F., Biswas, P., & Das, S. (2018). Superior performances of in situ synthesized ZnO/PVDF thin film based self-poled piezoelectric nanogenerator and self-charged photo-power bank with high durability. Nano Energy, 44, 456-467.
Wang, Z. L., & Song, J. (2006). Piezoelectric nanogenerators based on zinc oxide nanowire arrays. Science, 312, 242-246.
Yeganeh, R. Baqerzadeh Shahri, S. A., & Salehi, M. (2018). Experimental and numerical investigation of energy harvesting from harmonic loading on the wing of a micro-UAV with different aspect ratio. 26th Annual International Conference of the Iranian Society of Mechanical Engineers. May 24-27, Semnan University, Semnan, Iran. | ||
|
آمار تعداد مشاهده مقاله: 1,021 تعداد دریافت فایل اصل مقاله: 583 |
||