Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead(

-Abdoshahi nezhad, S., Borghei, M. and Seyedi, M., 2015. Elimination of hexavalent chromium by ferrite nanoparticles. Iranian Journal of Chemistry and Chemical Engineering, 34(1): 29 – 37.

-Alaee, M. A. and Hosseini, S. S., 2015. Opportunities and challenges of separation and removal of heavy metals from the wastewater of lead and zinc industrial units by membrane processes. Iranian Chemical Engineering Journal, 13(77): 91 – 105.

-Akati, N., 2016. Investigating the process of removing nickel and zinc from the aquatic environment using orange peel. Environmental Science and Technology, 18(2): 275 – 282.

-Anbia, M. and Rahimi, F., 2016. Application of response surface methodology for optimization of platinum (IV) adsorption using magnetic cellulose nanoparticles modified with ethylenediamine. Iranica journal of energy and environment, 7(4): 367 – 374.

-Anirudhan, T. S. and Rejeena, S. R., 2013. Selective adsorption of hemoglobin using polymer – grafted – magnetite nanocellulose composite. Carbohydrate polymers, 93: 518 – 527.

-Attarad, A., Zafar, H., Zia, M., Ul Haq, I., Phull, A. R., Sarfraz Ali, J. and Altaf, H., 2016. Synthesis, characterization, applications, and challenges of iron oxide nanoparticles. Nanotechnology, Science and Applications, 9: 49 – 67.

-Asna Ashari Ivari, H. And Arabi, V. H., 2013. Synthesis of iron oxide magnetic nanoparticles by in situ method and evaluation of the effect of concentration ratio of reactive materials on particle size and magnetic properties. Journal of Ceramic Science and Engineering, 2(1): 77 – 84.

-Babel, S. and Kurniawan, T. A., 2003. Low-cost adsorbents for heavy metals uptake from contaminated water: a review. Journal of Hazardous Materials, 97: 219 – 243.

-Biliuta, G. and Coseri, S. 2016. Magnetic cellolosic materials based on TEMPO- oxidized viscose fibers. Cellulose, 23(6): 3407 - 3415.

-Cao, Sh. L., Xu, H., Li, X., Lou, W. Y. and Zong, M., 2015. Novel Papain - mgnetic nanocrystalline cellulose nano – biocatalyst: a highly efficient biocatalyst for dipeptide biosynthesis in deep eutectic solvents. Aspect Sustainable chemistry engineering. 3(7): 1589 – 1599.

-Chen, L., Berry, R. M. and Tam, K. C., 2014. Synthesis of b-cyclodextrin modified cellulose nanocrystals (CNCs) - Fe₃O₄ - SiO₂ superparamagnetic nanorods. Aspect Sustainable Chemistry Engineering, 2: 951 – 958.

-Davapanah, M. and Ahmadpour, A., 2014. Overview of improved silica and polymer-based adsorbents to remove water and wastewater pollutions. Iranian Journal of Chemistry and Chemical Engineering, 13(72): 30 – 46.

-Dias, A. M. G. C., Hussein, A., Marcos, A. S. and Roque, A. C. S., 2011. A biotechnological perspective on the application of iron oxide magneti colloids modified with polysaccharides. Biotechnology Advances, 29: 142 – 155.

-D’ Mello, J. P. F., 2003. Food safety: contamination and toxins. CABI Publishing, Wallingford, Oxon, UK, Cambridge, 480p.

-Ebrahimi, A and Movahedian Attar, H., 2003. Performance Evaluation of Natural Zeolites and Synthetic Resins in Ni²⁺, Zn²⁺, and Cu²⁺ Ions Removal from Industrial Wastewater.Research in Medical Sciences, 8(4):7580. (Persian).

-Eghbalpour, S. and Manafi, S., 2013. Experimental study of the addition of iron oxide nanoparticles to the absorption of algae biomass to remove chromium from water. Nano materials Journal, 5(15): 211 – 221.

-Eslami, A. and Nemati, A., 2015. Investigation of Heavy Metal Removal from Aquatic Environments Using Bioremediation Technology (Review Study). Journal of Health in the field, 3(2): 43 – 51.

-Fathi, M. R. and Moghadamian pour, F., 2016. Removal of thiocyanate from aqueous solutions using modified Fe3O4 nanoparticles with chitosan-iron (ІІІ) complex. Journal of Applied Chemistry Research, 11(39): 47 – 64.

-Fuhrman, H., Mikkelsen, P. S. and Ledin, A., 2007. Simultaneous removal of As, Cd, Cr, Cu, Ni and Zn from stormwater: Experimental comparison of 11 different sorbents. Water Research, 41: 591 – 602.

-Gómez-Pastora, J., Bringas, E. and Ortiz, I., 2014. Recent progress and future challenges on the use of high performance magnetic nano-adsorbents in environmental applications. Chemical Engineering Journal, 256: 187 - 204.

-Guo, J., Filpponen, I., Johnsson, L. S., Mohammadi, P., Latikka, M., Linder, M. B., Ras, R. H. A. and Rojas, O. J., 2017. Complexes of magnetic nanoparticles with cellulose nanocrystals as regenerable highly efficient and selective platform for protein seperation. Bio Macromolecules, 18(3): 898 – 905.

-Gurgel, L.V. A., Junior, O. K., Gil, R. P. F. and Gil, L. F., 2008. Adsorption of Cu (II), Cd (II), and Pb (II) from aqueous single metal solution by cellulose and mercerized cellulose chemically modified with succinic anhydride. Bioresource Technology, 99: 3077 - 3083.

-Hadadnejad, Z., 2014. Production and characterization of thin layers of iron garnet by sol-gel method in the presence of the middle layer. Master Thesis, Shahid Beheshti University, Tehran, Iran.

-Hiwachi, A., Bahrami, S. H., Arami, M. and Karimi, A., 2015. Production of Alpha-cellulose and carboxymethylcellulose from cellulose waste. The 1^st national conference on wood and lignocellulosic products, Gonbad Kavous. 10 p.

-Jalilian, Z., 2011. Study of the application of biodegradable biopolymer of cellulosic sulfuric acid as a new and environmentally friendly biopolymer in the refining of heavy metals (Cd²⁺, Cu²⁺, Mn²⁺, Ni²⁺, Pb²⁺). Master Thesis in Chemistry, University of Marine Sciences and Technology Khorramshahr, Iran. 

-Jiriaee, F., Shahbazi, A. and Bahrami, Z., 2016. Magnetic nanocomposite adsorbent synthesis and removal of Pb (II) ionic effluent: Optimization and modeling of adsorption process. Journal of Applied Chemistry Research, 11(40): 145 – 160.

-Karami, Z. and Soleimani, A., 2013. A review of antibacterial cotton fibers. Journal of Studies in the Color World, 3: 43 – 51.

-Li, P., Jiang, L., Zhu, L. X., Gou, J. and Wang, A., 2015. Synthesis of convalently crosslinked attapulgite / poly (acrylic acid – co – acrylamide) nanocomposite hydrogels and their evaluatuon as adsorbent for heavy metal ions. Journal of Industrial and Engineering Chemistry, 23: 188 – 193.

-Long, Z., Li, H. F., Yang, X. and Liang, H. N., 2009. Study on preparation and characterization of magnetic paper with bleached chemical pulp. 2^nd  International congress on image and signal processing. 987: 1: 4131.

-Mahdieh, A., Mahdavian, A., Farhadnejad, H. and Salehi Mobakheh, H., 2015. Introduction to magnetic nanoparticles, their synthesis methods and their applications. Nanoscience, 41: 25 – 35.

-Mall, I. D., Srivastava, V. C., Agarwal, N. K. and Mishra, I. M., 2005. Adsorptive removal of malachite green dye from aqueous solution by bagasse fly ash and activated carbon-kinetic study and equilibrium isotherm analyses. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 264(1): 17 - 28.

-Maskkor, M., Tajvidi, M., Kimura, T., Kimura, F. and Ebrahmi, Gh., 2011. Fabricating unidirectional magnetic papers using permanent magnets to align magnetic nanoparticles covered natural cellulose fibers. Bioresources, 6(4): 4731 - 4738.

-Mobasherpour, I., Salahi, E. and Pazouki, M., 2012. Comparative of the removal of Pb2+, Cd2+ and Ni2+ by nano crystallite hydroxyapatite from aqueoussolutions: Adsorption isotherm study. Arabic journal of chemistry, 5: 439 – 446.

-Mohammadzadeh, R., Charm, M., Motamidi, H. and Mohabbat, A., 2014. Biological uptake and biodegradation of cadmium and nickel in a competitive solution by three bacterial isolates from soil contaminated with wastewater sludge. World of Microbes Journal, 7(3): 241 – 251.

-Mobtaker, H., Kazemian, H., Malekinezhad, A., Zeinali, A. A. and Pakzad, M. R., 2005. Investigation of the use of synthesized A and P zeolites from Iranian natural clinoptilolite zeolite to remove heavy cations from simulated effluents. Journal of Chemistry and Chemical Engineering, 24(2): 51 – 61.

-Monajjem, M. H., Heidari, A. and Bagheri Marandi, Gh., 2015. Comparison of the ability of nano clay and clay extracted from different soils to stabilize some heavy elements. Journal of Soil and Water Conservation Research, 23(3): 189 – 205.

-Mousavi Buiki, M. And Tehrani, R., 2016. Preparation and identification of magnetic nanocomposites based on nanocellulose and its application in the removal of heavy metals. The 1^st national conference on new research in chemistry, chemical and petroleum engineering, Shiraz. 13 p.

-Naghizadeh, A. and Momeni, F., 2015. Evaluation of the efficiency of graphene oxide nanoparticles in the removal of chromium and lead from aqueous solutions. Scientific Journal of Birjand University of Medical Sciences, 22(1): 27 – 38.

-Ren, S., Zhang, X., Dang, L., Lei, T., Teng, Zh., Song, K., Sun, X. and Wu, Q., 2017. Cellulose nanocrystal supported superparamagnetic nano rods with aminated silica shell: synthesis and properties. Journal of Materials Science, 52: 6432 – 6441.

-Rios, C. A., Williams, C. D. and Roberts, C. L., 2008. Removal of heavy metals from acid mine drainage (AMD) using coal fly ash, natural clinker and synthetic zeolites. Journal of Hazardous Materials, 156: 23 – 35.

-Shojaeenia, Sh. and Tajbakhsh Jadidi, M., 2016. The effect of removing methylene blue from aqueous solution using modified beta-cyclodextrin or magnetic cellulose nanofiber. The 3^rd International Conference on New Research Achievements in Chemistry and Chemical Engineering, Tehran. 6 p.

-Shukla, S. Roshan, R. and Pai, S., 2005. Adsorption of Cu (ІІ), Ni (ІІ) and Zn (ІІ) on modified jute fibers. Bioresource Technology, 96: 1430 – 1438.

-Shahmohmmadi, Z. and Khajeh, M., 2010. The effect of sawdust adsorption changes on the kinetics of chromium metal uptake in aqueous solution. Ecology, 36(56): 61 - 68.

-Small, A.C. and Johnston, J. H., 2009. Novel hybrid materials of magnetic nanoparticles and cellulose fibers. Journal of Colloid and Interface Science, 331: 122 - 126.

-Spaldin, N. A., 2010. Magnetic materials, fundamentals and applications. Cambridge University Press, New York, 291p.

-Taavoni Gilani, A., 2012. Synthesis and characterization of magnetic iron oxide nanoparticles modified with a polymer mixture of starch / carboxy methylcellulose to investigate the targeted release of the antiviral drug acyclovir. Journal of Nanomaterials, 23(10): 21 – 11.

-Tayeban, M. R., Torabi, A., Najafpour, A. A., Alidadi, H. V. and Zezvali, A., 2012. Investigation of bio absorption methods of chromium and cadmium heavy metals from industrial effluents using agricultural wastes (review study). Navid No Journal of Medical Sciences, 16(58): 20 – 26.

-Usman, A. R. A., 2008. The relative adsorption selectivity of Pb, Cu, Zn, Cd and Ni by soils developed on shale in New Valley, Egypt. Geoderma, 144: 334 - 343.

-Weixing, S., Xiangjing, X. and Gang, S., 1998. Chemically modified sunflower stalks as ascent for color removal from textile wastewater. Journal of Applied Polymer Science, 71: 1841- 1850.

-Wu, W. B., Jing, Y., Gong, M. R., Zhou, X. F. and Dai, H. Q., 2011. Preparation and properties of magnetic cellulose fiber composites. Bioresources, 6(3): 3396 - 3409.

-Xiong, R., Lu, C., Wang, Y., Zhou, Z. and Zhang, X., 2013. Nanofibrillated cellulose as the support and reductant for the facile synthesis of Fe3O4/Ag nanocomposites with catalytic and antibacterial activity. Journal of Materials Chemistry A, 1: 14910 - 14918.

-Zbroil, R., Mashlan, M. and Petridis, D., 2002. Iron (III) Oxides from Thermal Processes Synthesis, Structural and Magnetic Properties, Mo 1ssbauer Spectroscopy Characterization, and Applications. Chemistry of Materials, 14: 969 – 982.

-Zhou, Y., Fu, Sh., Zhang, L., Zhan, H. and Levit, M. V., 2014. Use of carboxylated cellulose nanofibrils – filled magnetic chitosan hydrogel beads as adsorbents for Pb(‖). Carbohydrate Polymers, 101: 75 – 82.