Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 34, Volume 35, Issue 1 - Serial Number 70, April 2020, Pages 61-75 PDF (676.82 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2020.128617.1584 | ||
| Authors | ||
| Ramin Vaysi* ; Yousef Yousefi-golordi | ||
| Wood and paper dept., Islamic Azad University of Chalous Branch. | ||
| Abstract | ||
| This study was aimed to investigate the effect of cellulose nano-fibers and chitosan on optical and mechanical properties of chemi-mechanical pulp. For this purpose, some of the bleached CMP pulp of Mazandaran Wood and Paper Industries (MWPI) were randomly selected as a control sample. In addition, the cellulose nanofibers were used as a white gel at 3 levels of 0, 2, and 3%. The chitosan was then added to the CMP pulps suspensions at 5 levels of 0, 0.5, 1, 1.5, 2%, as well. Hand-sheets with a basis weight of 60 gr/m2 were prepared from the mentioned pulps. The optical and mechanical properties were then measured and compared using TAPPI standard test methods. The results showed that by adding chitosan, tear, tensile, burst and breaking length strengths, air resistance, yellowness, and greenness increased and brightness, Cobb 60 and a* factor decreased. On the other hand, with the addition of chitosan and nano-cellulose to CMP pulp, the tensile, burst, breaking length strengths, air resistance, Cobb 60, yellowness and a* factor increased and the tear, brightness, and opacity decreased. Moreover, the findings showed that by simultaneous adding 2% chitosan, 2% chitosan, and 3% cellulose nanofibers to the CMP pulp, most of the paper properties were improved. Therefore, it can also be introduced as the best treatment. | ||
| Keywords | ||
| Chitosan; Nano cellulose; CMP pulp; Optical and mechanical properties | ||
| References | ||
|
-Aliniyay Lakani, S., Afra, E. and Yousefi, H., 2016. Studing the effect of pulp refining and paper pressing and using nano fibrillated cellulose to improve the CMP pulp properties, Iranian Journal of Wood and Paper Science Research,31)2),224-236. -Asadi,F., Nazarnezhad, N. and Asadpour Attoeii, Gh., 2016. Preparation of nano-cellulose from cladophora, fibrous algae, and utilizing at the product to improve the strength properties of CMP pulp, Iranian Journal of Wood and Paper science Research ,31(4), 695-702. -Ashoori, A., Harun, J., Raverty, J.D., Zin, W. Md. and Nor, M., 2005. Effect of chitosan addition on the surface properties of kenaf (Hibiscus cannabinus) paper, Iranian polymer journal, 9, 807-814. -Barzan A. and Soraki, S., 2002. Procedure of experimental for pulp and paper, Mazandaran Wood and Paper Industries, Sari, Iran, 111-121, (in Persian). -Costa, M.M. and Colodette, J.L., 2007. The impact of kappa number composition on eucalyptus kraft pulp bleach ability, Brazilian Journal of Chemical Engineering, 24(1): 61-71. -Henriksson, M., Berglund L.A., Laksson, P. and Nishino,T., 2008. Cellulose nano-paper structures of high toughness, Biomacromolecules, 9(6), 1579-1585. -Hasanzadeh, H., Hejazi, S., Yosofi, H., Mahdavi, M. and Abdolkhani, A., 2013. Effect of using cellulosic nanofibers and cationic starch on properties of rice stalk soda antraqinon pulp, Journal of Forest and Wood Products, 67(1), 105-117. -Hadilam,M., Afra, E., and Yousefi, H., 2013. Effect of cellulose nano-fibers on the properties of bagasse paper, Journal of Forest and Wood Products, 66(3), 351-366. -Heermann, M., Welter, S. and Hubbe M. A., 2006. Effect of high treatment levels in a dry-strength additives: program based on deposition on polyelectrolyte complexes, how much glue is too much? Tappi journal, 5(6), 9-14. -Kang, T., 2007. Role of external fibrillation in pulp and paper properties, Doctoral dissertation, Department of forest products technology, Helsinki University of Technology, Finland, 41 p. -Li, H., Du, Y. and Xu, Y., 2004. Interaction of cationized chitiosan with components in a chemical pulp suspension, carbohydrate polymers journal, 58, 205-214. -Limmatainnen, H., Visanko,M., Sirvio,J. A., Hormi, O.E.O. and Niinimaki, J., 2012. Enhancement of nano-fibrillation of wood cellulose through sequential periodate-chlorite oxidation, Bio-macromolecules, (13):1592-1597. -Luiss, A.J. and Jackson, C., 2002. Text book of pulping technology, McGraw-Hill, New York, NY, 126-132. -Mohseni Tavakoli, Resalati H., Afra, E., Imani , R., Liimatainen, H., 2014.Effect of chitosan-nanosilica sehf-assembly layers chitosan on cotton liner fiber and the paper properties, Iranian Journal of Wood and Paper Science Industries,5)2),81-92. -Nikolaeva, M., 2010, Measurement and improvement of wet paper web strength, Master Degree program in chemical and process engineering, Lappeenranta University of Technology:38-40. -Nada, A. M. A., El-Sakhawy, M., Kamel, S.,and Eid,M.A.M.,2005. Effect of chitosan and its derivatives on the mechanical and electrical properties of paper sheets. Egyptian journal of solids, 28(2):202-208. -Nicu, R., Bobu,E.., and Desbrieres, J.,2010, Chitosanas cationic polyelectrolyte in wet-end papermaking system, Cellulose chemistry and technology journal,10:102-108. -Nogi, M. Iwamoto, S., Nakagaito,N.A. , and Yano,H., 2009. Optically transparent nano-fiber paper, Advanced Materials, 21:1595-1598. -Pourkarim Dodangeh, H., Jalali Torshizi,H., Rudi,H., Ramzani,O., 2016. Performance of nano fibrillated cellulose(NFC) and chitosan bio-polymeric system on recycled and paper properties of old corrugated containers, Iranian Journal of Wood and Paper Science Industries,7)2),297-309. -Piet, H.B., Jan, B., and Wielema T.A., 2002. Anionic wet-end starches a wealth of possibilities to improve paper quality and/or reduce paper, TAPPI Technology Summit. -Pariser,E.R., and Lombardi,d.p, 1988. A guid to the research literature chitin, Source book, Plenum Press, New Yourk,USA, P:560. -Rahmaninia, M., Rohi,M., Ramezani,O., and Zabihzadeh, S.M., 2015. The effect of pulp suspension pH on the performance of chitosan-nanobentonite as a dry strength additive in hardwood CMP pulp, Journal of Forest and Wood Products, 68(2), 347-357. -Rashidi Joybari, I., Azadfalah, M., Resalati, H., Hamzeh, Y., Yosofi, H., 2015. Investigation of effect cationic soft wood fiber by EPTMAC and mixed it's with CMP pulp, Journal of Forest and Wood Products, 68(2):235-245. -Rasoulpour Hedayati, N., Nazarnezhad, N., Omid Ramezani, O., 2012. Fiber Surface Modification of Kraft Pulp in Presence of Chitosan Polymer, Journal of Forest and Wood Products, 67(2), 489-501. -Syverud, K. and Stenius, P., 2009. Strength and barrier properties of MFC films, Cellulose, (16):75-85. -Steckel,H., and Nogly,F.M.,2003. Production of chitosan pellets by extrusion/Herinization, European Journal. PHarm.BiopHar, 46, 1-6. -Tajik, M., 2015. Using of nano-cellulose, poly acrylamide and cationic starch in internal H-bond reinforced of bagasse printing paper, M.S. thesis, Shahid-Behesti University, 1-2. -Technical Association of Pulp and Paper Industry, 2009. Standard Test Methods. Tappi Press, Atlanta, GA. USA. -Vanerek, A., Alince, B., and Van de ven, T.G.M., 2006. Bentonite delamination induced by pulp fibers under high shear monitored by calcium carbonate deposition, colloids and surfaces A: Physicochemical and engineering aspects, 280(1-3):1-8. -Vaysi, R., Kord, B., 2013.The effects of H2O2 bleaching and DTPA spraying on the brightness stability of hornbeam CMP pulp following accelerated irradiation aging, BioResource Journal,8(2),1909-1917. -Wagberg, L., Forsberg,S., Johansson,A., and Juntti, P., 2002. Engineering of fiber surface properties by application of polyelectrolyte multilayer concept, Part 1. Modification of paper strength. Journal of Pulp and Paper Science, 28(7):222-228. -Yousefi, H. Nishino,T., Faezipour,M., Ebrahimi,G., and Shakeri, A., 2011. Direct fabrication of all-cellulose nanocomposite from cellulose microfibers using ionic liquid-based Nanowelding, Biomacromolecules, 12(11):4080-4085. | ||
|
Statistics Article View: 617 PDF Download: 630 |
||
Journal management system. designed by sinaweb