Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 5, Volume 33, Issue 1 - Serial Number 62, April 2018, Pages 38-49 PDF (504.43 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2018.110569.1409 | ||
| Authors | ||
| Mojtaba Goli* 1; Saeed Mahdavi2 | ||
| 1M.Sc. graduate in pulp and Paper industry, Sari University of Agricultural Sciences and Natural Resources, Iran | ||
| 2Associate professor, Wood and Forests Products Division, Research Institute of Forests and Rangelands, Karaj, Iran | ||
| Abstract | ||
| Abstract In recent years, environmental problems of irregular wood harvesting and shortages of raw materials made wood and paper Ind. & country to be faced serious crises. And some researchers and industry experts have led to fundamental and long-term solution for supplying raw materials to these industries. This present study aimed to determine the optimum conditions of pulping and bleaching for several hardwood forest species (as a separate cooking & Combining with 40% popular, 15% beech and hornbeam 45%) and paper evaluation. After preparing CMP in accordance with the terms of an 85% efficiency , Different cooking times (25-60 minutes, temperature of 170 °C, the ratio of L TO W & 7 TO 1 and Making hand sheet with standard 60 gram per square meter, Optical and mechanical properties of paper was evaluated. The results showed that, A species that was used in cooking, Poplar were better in terms of total properties with mechanical and optical properties. Also in Bleaching stage, the tensile strength index is decreased & Burst and tear strength index is improved. The maximum brightness is related to poplar species with mixing and without species and after bleaching the beech is the lowest ones. In both methods the rate of opacity and yellowness is decreased. | ||
| Keywords | ||
| hardwood forest species; shortages of raw materials; CMP; Optical and mechanical Properties | ||
| References | ||
|
- Afra, E., 2005. Properties of paper an introduction, Aiij Publications.392 pages. (Translated In Persian) - Goli, M., Asadpour, G. and Saeid M., 2015. A Barimani Effect of birch wood mixing on optical and mechanical properties of CMP pulp produced from forest species wood Iranian journal of sciences and technical natural resources), 30(4):662-673. (In Persian) - Kokta, B.V. and Ahmed, A., 1998. Steam explosion pulping, Derevarsky-Vyskum, 127:23-39. ISBN 0-471-15770-8. - Mohta, D.C., Roy, D.N. and Whiting, P., 2003. Bleaching study of kenaf mechanical pulps. Tappi journal. 2:8. 29-31. - Pan, G.X., 2003. Pulp yield loss in alkaline peroxide bleaching of aspen CTMP Part 1: Estimation and impacts. Tappi journal. 2:9:27-31. - Wang, Z., Chen, K., Li, J., Xu, J., Liu, Y. and Han, W., 2009. Totally Chlorine Free Bleaching of Bagasse Soda Pulp, China Pulp Pap. 28(12):1–4 -Smook, G.A., 2001. Handbook of Pulp & paper technologists (3rd Edition). Angus Wilde Publications, Inc.; 3rd edition (March 1, 2003). -Goli, M., Asadpour, G. and Saeid M., 2015.Investigation on imported aspen admixture with two hardwoodsnative forest species for CMP pulping. Journal of wood & forest sciences & technology, 6(2):275-284. (In Persian) -Bajpai, P., 2012. Environmentally Benign Approaches for Pulp Bleaching (Second Edition). ISBN: 978-0-444-59421-1, Elsevier, 400 pages. -Akkemik, U. and Yaman, B., 2012. Wood anatomy of eastern Mediterranean species, Kessel publishing house- Germany, 31 pages. -Ghasemian, A. and Khalili, A., 2011. Principle and methods of paper recycle. Tehran: Aiij press, 184 pages. (In Persian) -Goli, M., Zabihzadeh, S.M. and Asadpour, G., 2013. Effect of species mixing on chemimechanical pulp properties, M.Sc. thesis, Sari Agricultural Science and Natural Resources University, Faculty of Natural Resources 93 p. -Hoseinzadeh, A., Gholamnezhad, M. and Veysi, R., 2011. Investigation the effects of Salix alba wood on the some optical and mechanical properties of newspaper from chemical mechanical pulp (case study: Mazandaran wood and paper industrial), Iranian journal of sciences and technical natural resources), 6(2):89-103. (In Persian) -Huda, A.A., Koubaa, A., Cloutier, A., Hernandez, R.E. and Pierre, P., 2012. Anatomical properties of selected hybrid poplar clones growth in southern quebec, BioResources, 7(3):3779-3799. -Kiaei, M., 2011. Basic density and fiber biometry properties of Hornbeam wood in three different altitudes at Age 12, middle-east, Journal of scientific research, 8(3):663-668. -Lu, J., Chorney, M. and Peterson, L., 2009. Sustainable trailer flooring, BioResources, 4(2):835-849. -Ministry of Agrigultue,Forestry and CountryPasture,Technical office forestry,year 1989 Modares University. (In Persian) -Sixta, H., 2006. Handbook of paper and board, Wiley-VCH Verlag GmbH & Co.KGaA. 1369 pages. -Ugurlua, M., Gurses, A., Dogar, C. and Yalcın, M., 2008. The removal of lignin and phenol from paper mill effluents by electrocoagulation. Journal of Environmental Management, 87(3), 420–428. -Zeinaly, A., Resalati, H. and Tasooji, M., 2011. Investigation effect of using woods of Hornbeam & Beech in compound of hardwood stems wood mixture on CMP pulp properties, Journal of wood & forest sciences & technology, 18(1):77-90. (In Persian) | ||
|
Statistics Article View: 734 PDF Download: 520 |
||
Journal management system. designed by sinaweb